The purpose of this article is to study the dielectric dispersion of two different ternary composites made of epoxy resin (RE), black iron oxide (Fe3O4) with one of the two titanates (calcium titanate (CaTiO3) or strontium (SrTiO3)) on several frequency bands. Additionally, the effect of the two titanates and the (Fe3O4) on the permittivity and conductivity of these ternary composites is investigated. These composite materials were characterized using time domain spectroscopy (TDS). The inclusion of the two titanates increased the real permittivity and conductivity of the two composites, shifting the resonance frequency (ƒR) towards the low frequency range and causing the opposite phenomenon for the static permittivity (ε
s). The frequency dispersion behavior model for the complex permittivity has been proposed to improve the effectiveness of the predictive frequency model through a better choice of the damping factor and to bring theoretical and experimental findings closer together. Comparing these data shows that the proposed model is applicable to ternary combinations with high accuracy. The values of the quality factor (Q) obtained are encouraging in microwave applications. These composite materials witch containing CaTiO3 and SrTiO3 inclusions have contributed to the development of dielectric permittivity that suits very well frequency communication systems.
The goal of this paper is to study the dielectric behavior, in the ternary composites microwave domain, and simplifying ternaries models into binaries ones using time domain spectroscopy. We worked on three ternary composites made of epoxy resin (Re), manganese dioxide (MnO2) and one of three different titanates (XT): barium titanate (BT), calcium titanate (CT) or magnesium titanate (MT). These composites samples dielectric behavior is inspected over a frequency range from DC to 5 GHz. This aims to optimize the predictive modified Lichtenecker's law model (MLL) through a better smoothing shape factor making theoretical and experimental results very close to each other. The comparison between these results shows that the MLL model is pertinent for ternary mixtures (Re-XT-MnO2) with an appreciable accuracy degree. Another numerical approach applied to the Re-[Re-XT-MnO2] mixtures using a binary mixture model equivalent to the previous ternary one based on a simplified MLL expression and preserving the same mixture constituents. This model results are in good agreement not only with ternaries ones being modeled with this law but also with other modeling laws appreciated with binary composites. This study interest lies on these materials application in the telecommunications components miniaturization and in microwave electronic applications.
In the same matrix of epoxy resin, Fe3O4 powder was evenly mixed with one of two titanate powders, CaTiO3 or SrTiO3. The dielectric properties of these blends were evaluated using the measurement technique of time domain spectroscopy. During this work, low-frequency analyses (DC - 300 MHz) were carried out, mainly focusing on the static permittivity and conductivity properties as a function of titanate concentrations. The results allowed us to confirm the validity and effectiveness of the modified Lichtenecker Laws (MLL). Significant agreement can be shown between the MLL-calculated and experimentally determined permittivity values for ternary combinations. The perspective of this research lies in the production of new materials for use in the field of telecommunications and in particular for microelectronic components.
This study aim is to investigate the ternary composites dielectric behavior and experimentally validate the predictive model that simplifies ternary models into binary ones using time domain spectroscopy (TDS). The scattered white silicon dioxide (SiO2) powder was evenly mixed with barium titanate (BaTiO3 or BT) powder in the same epoxy resin (RE) matrix. Over a frequency range from DC to 30 GHz, the dielectric behavior of these composite samples is examined, adding in particular a low frequency study at 500 MHz. The BT addition grew the mixture dielectric permittivity from 3.6063 to 8.2313 and moving the resonance frequency (ƒr) in the direction of the low frequency from 26.245 GHz until 17.09 GHz. By improving the shape factor smoothing and bringing theoretical and experimental results closer together, this seeks to optimize the modified Lichtenecker's law (MLL). These findings comparison demonstrates that the MLL model applies to ternary composites (RE-BT-SiO2) with an acceptable accuracy level. Another numerical method was used to evaluate the RE-[RE-BT-SiO2] composites employing a binary mixing model based on an MLL equation that is identical to the former ternary. This model results correlate well with binary composites experimental values as well as ternaries that are modeled using this law. This research perspective lies on the production of new materials for use in microelectronics and particularly on the MOS structure oxides improvement.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.