No abstract

The integration of phase change materials (PCMs) in the construction sector is very promising for the improvement of the thermal and energy performance of buildings. This multi-variable study aims to reveal the contribution of PCM plaster according to the type of masonry (single cement bricks or double clay bricks), the type of plaster (PCM or cement plaster) and its location (interior or exterior) to reduce indoor temperature fluctuations and energy consumption levels. Small-scale experimentation and dwelling dynamic modelling of several types of rooms have revealed that compared to cement plaster, PCM plaster on the interior surface of exposed walls reduces the indoor temperature fluctuation range by up to 2.5°C on winter days and by up to 2.6°C on summer days if it is applied on the exterior surface of the single-partition walls. In the case of double-partition walls, the reduction in the indoor temperature fluctuation range reaches 1°C on winter days and 1.3°C on summer days. Interior PCM plaster reduces the heating energy demand in winter by up to 25% for single partitions and 21% for double partitions. In summer, the reduction in cooling energy demand with exterior PCM plaster is up to 36% for single walls and 44% for double walls. Compared to cement plaster, although the thermal and energy reduction percentages of PCM plaster are greater for single-partition walls, the temperature fluctuations and energy consumption are lower for double-partition walls. Determination of the optimum melting temperature and thickness of PCM plaster would improve the performance obtained.

No abstract

Improving the energy and thermal performances of buildings involves studying all the internal and external factors that can affect them. These factors include air infiltration that can occur through the building envelope. In order to meet the requirements of their thermal regulations, the measurement of infiltration become a common practice in some European and North American countries. Although this practice is still very rare in Morocco even not applied. In order to estimate the impact of air infiltration on the energy consumption of the Moroccan residential sector, we have carried out measurements using pressurization by blower door in four houses located in Casablanca with different standings and characteristics. The dynamic modelling of houses with measured leakage rates allow us to quantify the thermal losses due to infiltration and the corresponding energy impact. The dynamic modelling results show that the interior temperatures of the four houses are negatively impacted by up to 3.5 degrees and that the additional energy cost reaches up to 26% of the winter electricity consumption.