While the formation of (tri)block copolymer hydrogels has been extensively investigated, such studies mostly focused on equilibrium self-assembling whereas the use of preformed structures as building blocks such as out of equilibrium, quenched, nanofibrillar micelles is still a challenge. Here, we demonstrate that quenched, ultralong polystyrene-b-poly(ethylene oxide) (PS-b-PEO) micelles can be used as robust precursors of hydrogels. Two cross-linking strategies, (i) thermal fusion of micellar cores and (ii) chemical cross-linking of preformed micellar coronas were studied. The gelation process and the structure of the micellar networks were investigated by in situ rheological measurements, confocal microscopy and transmission electron microscopy. Direct observation of core fusion of preformed quenched micelles is provided validating this method as a robust gelation route. Using time sweep rheological experiments, it was found for both cross-linking methods that these 3D “mikado” gels are formed in three different stages, containing (1) initiation, (2) transition (growth), and (3) stabilization regimes.
The strain rate-dependent behavior of a unidirectional non-crimp fabric (UD-NCF) carbon fiber/snap-cure epoxy composite loaded along the transverse direction under quasi-static and dynamic conditions was characterized. Transverse tension and compression tests at quasi-static and intermediate strain rates were performed using hydraulic testing machines, while a split Hopkinson pressure bar (SHPB) apparatus was used for transverse compression tests at high strain rates. A pulse shaper was used on the SHPB apparatus to ensure dynamic equilibrium was achieved and that the test specimens deformed homogenously with a nearly constant strain rate. The transverse tensile strength at a strain rate of 16 s−1 increased by 16% when compared to that at quasi-static strain rates, while distinct localized fracture surface morphology was observed for specimens tested at different strain rates. The transverse compressive yield stress and strength at a strain rate of 325 s−1 increased by 94% and 96%, respectively, when compared to those at quasi-static strain rates. The initial fracture plane orientation for the transverse compression tests was captured with high-speed cameras and found to increase with increasing strain rate. The study provides an important data set for the strain rate-dependent response of a UD-NCF composite material, while the qualitative fracture surface observations provide a deeper understanding of the failure characteristics.
An experimental study was performed to characterize the evolution of damage in a unidirectional Non-Crimp Fabric (NCF) carbon fiber/snap-cure epoxy composite under in-plane quasi-static tensile loads. The NCF composites were manufactured using a High Pressure-Resin Transfer Molding (HP-RTM) process and comprised a fast-curing epoxy resin and heavy tow unidirectional carbon fiber NCF layers. Laminates with stacking sequences [0/±45/90] and [±45/0 ] were subjected to axial and transverse quasi-static tensile loads and an in-situ Edge replication (ER) technique was used to capture the damage evolution at predefined intervals. An imprint of the composite microstructure, as observed on the edges of a test coupon, was created on a cellulose acetate replicating tape, which was then observed under the microscope. The onset and progression of ply cracks and delamination, which were the two major damage modes present, were quantified and correlated with the stress-strain curves and changes in stiffness. The influence of stacking sequence and ply thickness are also captured.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.