Experimental research has shown the extraordinary potential of the addition of short fibers to cement-based materials by improving significantly the behavior of concrete structures for serviceability and ultimate limit states. Software based on the finite element method has been used for the simulation of the material nonlinear behavior of fiber-reinforced concrete (FRC) structures. The applicability of the existing approaches has often been assessed by simulating experimental tests with structural elements, in general of a small scale, where the parameter values of the material constitutive laws are adjusted for the aimed predicting level, which constitutes an inverse technique of arguable Discussion on this paper must be submitted within two months of the print publication. The discussion will then be published in print, along with the authors' closure, if any, approximately nine months after the print publication.
Experimental research has demonstrated the excellent performance of the near surface mounted (NSM) technique with carbon fibre reinforced polymer (CFRP) laminates for the shear strengthening of reinforced concrete (RC) beams. This paper presents a finite element analysis to evaluate the behaviour of RC beams shear strengthened with NSM CFRP laminates. To predict correctly the deformational and the cracking behaviour of RC elements failing in shear using a smeared crack approach, the strategy adopted to simulate the crack shear stress transfer is crucial. For this purpose, a strategy for modelling the fracture mode II was implemented in a smeared crack model already existing in the FEM-based computer program, FEMIX. This strategy is mainly based on a softening shear stress-shear strain diagram adopted for modelling the crack shear stress transfer. To assess the predictive performance of the developed model, the experimental tests carried out with a series of T cross section RC beams shear strengthened according to the NSM technique by using CFRP laminates were simulated. In this series of beams, three different percentages of CFRP laminates and, for each CFRP percentage, three inclinations for the laminates were tested: 90º, 60º and 45º. By using the properties obtained from the experimental program for the characterization of the relevant properties of the intervening materials, and deriving from inverse analysis the data for the crack shear softening diagram, the simulations carried out have fitted with high accuracy the deformational and cracking behaviour of the 2 tested beams, as well as the strain fields in the reinforcements. The constitutive model is briefly described, and the simulations are presented and analysed.
Near Surface Mounted (NSM) technique has proved to be a very effective technique for the flexural strengthening of RC beams. Due to the relatively small thickness of the concrete cover that several beams present, cutting the bottom arm of steel stirrups for the installation of NSM laminates might be a possible strategy, whose implications on the beam's load carrying capacity need to be assessed. When still stirrups are cut, however, the shear resistance can be a concern. This also happens when a strengthening intervention is carried out to increase the flexural resistance of a beam, since in certain cases it is also necessary to increase the shear resistance in order to avoid the occurrence of brittle shear failure. The present work assesses the effectiveness of a technique that aims to increase both the flexural and shear resistance of RC beams that have the bottom arm of the steel stirrups cut for the application of NSM laminates. This assessment is performed by experimental and numerical research. The main results of the experimental program are presented and analyzed, and the innovative aspects of a constitutive model implemented in a computer program are described, being their virtues and deficiencies discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.