The compatibility of SRI-3 polyisoprene rubber with plasticizing additives based on recycled petrochemical raw materials (DVCH, DVCH with modifying additive (MA) in the amount of 0.5; 1.0; 2.5; 5.0 and 10.0% mas.) in comparison with industrial petroleum oils (PO-6 and I-20). The compatibility of polymer with a plasticizer additive was evaluated by of experimental data using the equilibrium swelling method. As a result, the polimer-plasticizer interaction parameter (Huggins parameter) and the diffusion coefficient of plasticizing components in the polymer volume were determined. Analysis of the experimental data showed that the plasticizer component based on recycled petrochemical raw materials DVCH has better compatibility with the elastomer matrix SRI-3 compared to industrial oils PO-6 and I-20. Was established that the use of modifying additives in the amount of 0.5 and 1.0% mas. leads to an increase in the diffusion coefficient and a decrease in the Huggins parameter in comparison with DVCH in individual form It indicates their better compatibility with rubber SRI-3. Was shown that a further increase in the content of modifying additive (more than 1.0% mas.) in the volume of plasticizing component DVCH is impractical. This leads to a deterioration of the parameters, and, as a result, to a worse compatibility with the elastomer.
В обзоре изложены основные принципы совмещения пластификаторов с эластомерами, а также известные концепции и способы пластификации. Приведена классификация пластификаторов, используемых в резиновой промышленности. Рассмотрены экологические аспекты применения пластификаторов в составе эластомерных материалов. Показана актуальность переработки вторичного сырья, а именно отработанных масел, которые могут быть использованы для получения ценных нефтепродуктов. Особое внимание уделено особенностям применения пластифицирующих добавок, полученных на основе отработанных автомобильных масел, в составе эластомерных композиций.Проанализировано влияние продукта переработки отработанного масла ДВЧ с модифицирующей присадкой (производство ИООО «ДВЧ-Менеджмент», г. Минск, Беларусь) в сравнении с промышленным маслом И-20 на технологические характеристики и физико-механические свойства ненаполненных эластомерных композиций на основе полиизопренового каучука СКИ-3. Установлена связь свойств эластомерных композиций с качественным и количественным содержанием пластификатора.Ключевые слова: каучук, резиновая смесь, пластификация, вторичное нефтехимическое сырье, отработанное масло, вязкость по Муни.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.