With the aim of computing a complete energy balance of front crawl, the energy cost per unit distance (C = Ev(-1), where E is the metabolic power and v is the speed) and the overall efficiency (eta(o) = W(tot)/C, where W(tot) is the mechanical work per unit distance) were calculated for subjects swimming with and without fins. In aquatic locomotion W(tot) is given by the sum of: (1) W(int), the internal work, which was calculated from video analysis, (2) W(d), the work to overcome hydrodynamic resistance, which was calculated from measures of active drag, and (3) W(k), calculated from measures of Froude efficiency (eta(F)). In turn, eta(F) = W(d)/(W(d) + W(k)) and was calculated by modelling the arm movement as that of a paddle wheel. When swimming at speeds from 1.0 to 1.4 m s(-1), eta(F) is about 0.5, power to overcome water resistance (active body drag x v) and power to give water kinetic energy increase from 50 to 100 W, and internal mechanical power from 10 to 30 W. In the same range of speeds E increases from 600 to 1,200 W and C from 600 to 800 J m(-1). The use of fins decreases total mechanical power and C by the same amount (10-15%) so that eta(o) (overall efficiency) is the same when swimming with or without fins [0.20 (0.03)]. The values of eta(o) are higher than previously reported for the front crawl, essentially because of the larger values of W(tot) calculated in this study. This is so because the contribution of W(int) to W(tot )was taken into account, and because eta(F) was computed by also taking into account the contribution of the legs to forward propulsion.
In this paper a complete energy balance for water locomotion is attempted with the aim of comparing different modes of transport in the aquatic environment (swimming underwater with SCUBA diving equipment, swimming at the surface: leg kicking and front crawl, kayaking and rowing). On the basis of the values of metabolic power (E), of the power needed to overcome water resistance (Wd) and of propelling efficiency (etaP=Wd/Wtot, where Wtot is the total mechanical power) as reported in the literature for each of these forms of locomotion, the energy cost per unit distance (C=E/v, where v is the velocity), the drag (performance) efficiency (etad=Wd/E) and the overall efficiency (etao=Wtot/E=etad/etaP) were calculated. As previously found for human locomotion on land, for a given metabolic power (e.g. 0.5 kW=1.43 l.min(-1) VO2) the decrease in C (from 0.88 kJ.m(-1) in SCUBA diving to 0.22 kJ.m(-1) in rowing) is associated with an increase in the speed of locomotion (from 0.6 m.s(-1) in SCUBA diving to 2.4 m.s(-1) in rowing). At variance with locomotion on land, however, the decrease in C is associated with an increase, rather than a decrease, of the total mechanical work per unit distance (Wtot, kJ.m(-1)). This is made possible by the increase of the overall efficiency of locomotion (etao=Wtot/E=Wtot/C) from the slow speeds (and loads) of swimming to the high speeds (and loads) attainable with hulls and boats (from 0.10 in SCUBA diving to 0.29 in rowing).
The decomposition of swimmer drag into DSF, DP and DW suggests that increasing DSF on the upper-body of a swimmer reduces DP and DW by tripping the boundary layer and attaching the flow to the body from the shoulder to the knees. It is possible that body suits that cover the torso and legs may reduce drag and improve performance of swimmers.
The aim of this study was to investigate how fins with varying physical characteristics affect the energy cost and the efficiency of aquatic locomotion. Experiments were performed on ten college swimmers who were asked to swim the dolphin kick while using a monofin (MF) and to swim the front crawl kick with a small-flexible fin (SF), a large-stiff fin (LS) and without fins (BF, barefoot). The energy expended to cover one unit distance (C) was highest for BF (C=10.6+/-1.8 kJ m(-1) kg(-1) at 0.8 m s(-1)) and decreased by about 50% with LS, 55% with SF and 60% with MF, allowing for an increase in speed (for a given metabolic power) of about 0.4 m s(-1) for MF and of about 0.2 m s(-1) for SF and LS (compared with BF). At any given speed, the fins for which C was lower were those with the lowest kick frequency (KF): KF=1.6+/-0.22 Hz at 0.8 m s(-1) (for BF) and decreased by about 40% for SF, 50% for LS and 60% for MF. The decrease in KF from BF to SF-LS and MF was essentially due to the increasing surface area of the fin which, in turn, was associated with a higher Froude efficiency (eta(F)). eta(F) was calculated by computing the speed of the bending waves moving along the body in a caudal direction (as proposed for the undulating movements of slender fish): it increased from 0.62+/-0.01 in BF to 0.66+/-0.03 in SF and 0.67+/-0.04 in LS reaching the highest values (0.76+/-0.05) with MF. No single fin characteristic can predict a swimmer's performance, rather the better fin (i.e. MF) is the one that is able to reduce most KF at any given speed and hence to produce the greatest distance per kick (d=v/KF). The latter indeed increased from 0.50+/-0.01 m in BF to about 0.90+/-0.05 m in SF and LS and reached values of 1.22+/-0.01 m in MF.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.