No abstract

We present new photometry of 16 local Seyferts including 6 Compton-thick sources in N-band filters around 12-μm, obtained with the VISIR instrument on the 8-m Very Large Telescope. The near-diffraction-limited imaging provides the least-contaminated core fluxes for these sources to date. Augmenting these with our previous observations and with published intrinsic X-ray fluxes, we form a total sample of 42 sources for which we find a strong mid-infrared:X-ray (12.3 μm:2-10 keV) luminosity correlation. Performing a physically-motivated subselection of sources in which the Seyfert torus is likely to be best-resolved results in the correlation L MIR ∝ L X 1.11±0.07 , with a reduction of the scatter in luminosities as compared to the full sample. Consideration of systematics suggests a range of 1.02-1.21 for the correlation slope. The mean 2-keV:12.3-μm spectral index (α IX ) is found to be −1.10 ± 0.01, largely independent of luminosity. Indirectly-computed 12-μm bolometric corrections range over ≈10-30 if a known luminosity trend of X-ray bolometric corrections is assumed. Comparison with ISO data spanning a wider luminosity range suggests that our correlation can be extended into the quasar regime. That unobscured, obscured, and Compton-thick sources all closely follow the same luminosity correlation has important implications for the structures of Seyfert cores. The typical resolution-limit of our imaging corresponds to ∼70 pc at a median z = 0.01, and we use the tightness of the correlation to place constraints on the dominance of any residual emission sources within these physical scales. An upper-limit for any contaminating star formation of ≈40% of the unresolved flux is inferred, on average. We suggest that uncontaminated mid-IR continuum imaging of AGN is an accurate proxy for their intrinsic power.

Context. The interaction of the light from astronomical objects with the constituents of the Earth's atmosphere leads to the formation of telluric absorption lines in ground-based collected spectra. Correcting for these lines, mostly affecting the red and infrared region of the spectrum, usually relies on observations of specific stars obtained close in time and airmass to the science targets, therefore using precious observing time. Aims. We present molecfit, a tool to correct for telluric absorption lines based on synthetic modelling of the Earth's atmospheric transmission. Molecfit is versatile and can be used with data obtained with various ground-based telescopes and instruments. Methods. Molecfit combines a publicly available radiative transfer code, a molecular line database, atmospheric profiles, and various kernels to model the instrument line spread function. The atmospheric profiles are created by merging a standard atmospheric profile representative of a given observatory's climate, of local meteorological data, and of dynamically retrieved altitude profiles for temperature, pressure, and humidity. We discuss the various ingredients of the method, its applicability, and its limitations. We also show examples of telluric line correction on spectra obtained with a suite of ESO Very Large Telescope (VLT) instruments. Results. Compared to previous similar tools, molecfit takes the best results for temperature, pressure, and humidity in the atmosphere above the observatory into account. As a result, the standard deviation of the residuals after correction of unsaturated telluric lines is frequently better than 2% of the continuum. Conclusions. Molecfit is able to accurately model and correct for telluric lines over a broad range of wavelengths and spectral resolutions. The accuracy reached is comparable to or better than the typical accuracy achieved using a telluric standard star observation. The availability of such a general tool for telluric absorption correction may improve future observational and analysing strategies, as well as empower users of archival data.

Context. Absorption by molecules in the Earth's atmosphere strongly affects ground-based astronomical observations. The resulting absorption line strength and shape depend on the highly variable physical state of the atmosphere, i.e. pressure, temperature, and mixing ratio of the different molecules involved. Usually, supplementary observations of so-called telluric standard stars (TSS) are needed to correct for this effect, which is expensive in terms of telescope time. We have developed the software package molecfit to provide synthetic transmission spectra based on parameters obtained by fitting narrow ranges of the observed spectra of scientific objects. These spectra are calculated by means of the radiative transfer code LBLRTM and an atmospheric model. In this way, the telluric absorption correction for suitable objects can be performed without any additional calibration observations of TSS. Aims. We evaluate the quality of the telluric absorption correction using molecfit with a set of archival ESO-VLT/X-Shooter visible and near-infrared spectra. Methods. Thanks to the wavelength coverage from the U to the K band, X-Shooter is well suited to investigate the quality of the telluric absorption correction with respect to the observing conditions, the instrumental set-up, input parameters of the code, the signal-to-noise of the input spectrum, and the atmospheric profiles. These investigations are based on two figures of merit, I off and I res , that describe the systematic offsets and the remaining small-scale residuals of the corrections. We also compare the quality of the telluric absorption correction achieved with molecfit to the classical method based on a telluric standard star. Results. The evaluation of the telluric correction with molecfit shows a convincing removal of atmospheric absorption features. The comparison with the classical method reveals that molecfit performs better because it is not prone to the bad continuum reconstruction, noise, and intrinsic spectral features introduced by the telluric standard star. Conclusions. Fitted synthetic transmission spectra are an excellent alternative to the correction based on telluric standard stars. Moreover, molecfit offers wide flexibility for adaption to various instruments and observing sites.

We present velocity-resolved spectro-astrometric imaging of the 4.7 µm rovibrational lines of CO gas in protoplanetary disks using the CRIRES high resolution infrared spectrometer on the Very Large Telescope (VLT). The method as applied to three disks with known dust gaps or inner holes out to 4-45 AU (SR 21, HD 135344B and TW Hya) achieves an unprecedented spatial resolution of 0.1 − 0.5 AU. While one possible gap formation mechanism is dynamical clearing by giant planets, other equally good explanations (stellar companions, grain growth, photo-evaporation) exist. One way of distinguishing between different scenarios is the presence and distribution of gas inside the dust gaps. Keplerian disk models are fit to the spectro-astrometric position-velocity curves to derive geometrical parameters of the molecular gas. We determine the position angles and inclinations of the inner disks with accuracies as good as 1-2 • , as well as the radial extent of the gas emission. Molecular gas is detected well inside the dust gaps in all three disks. The gas emission extends to within a radius of 0.5 AU for HD 135344B and to 0.1 AU for TW Hya, supporting partial clearing by a < 1 − 10 M Jup planetary body as the cause of the observed dust gaps, or removal of the dust by extensive grain coagulation and planetesimal formation. The molecular gas emission in SR 21 appears to be truncated within ∼ 7 AU, which may be caused by complete dynamical clearing by a more massive companion. We find a smaller inclination angle of the inner disk of TW Hya than that determined for the outer disk, suggestive of a disk warp. We also detect significant azimuthal asymmetries in the SR 21 and HD 135344B inner disks.