No abstract

No abstract

No abstract

Creep properties of specimens taken from the core of AZ91D magnesium alloy ingots (9 pct Al, 1 pct Zn) were examined in the temperature range of 120 ЊC to 180 ЊC and stress range of 40 to 115 MPa. Solution-treated and aged creep specimens were also tested. The creep rates observed were about three orders of magnitude lower than those of pure magnesium, and elongations to fracture were seen to be at least twice those of pure magnesium. A minimum creep rate was reached after approximately 2/3 of the creep life of the specimens (except for the aged specimens, in which the minimum creep rate appears at the beginning of the test). A qualitative model for the creep process is proposed on the basis of the creep tests and optical, scanning electron, and transmission electron microscopy. This model proposes that dislocation motion on additional slip systems is the primary creep mechanism and that cracking acts as a stress relief mechanism. Structural instability dictates the amount of hardening and, hence, creep resistance.

No abstract