Creep-Feed Grinding(CFG) is one of the none-traditional machining in which form grinding to full depth is performed in limited number of passes. One of the most significant criteria which is taken into account to display valid machining parameters, is surface integrity. Surface integrity in CFG process is influenced by four main factors including surface roughness, superficial micro-crack, burning and changes in micro-hardness. According to prior investigations in CFG process, depth of cut plays an important role in surface integrity. In this study, the influence of cutting depth on workpiece surface integrity of cast nickel-based superalloy with alummina wheels, was investigated. During this study, a sample part was machined with variable depth of cut while the other parameters were Constant. After machining, surface roughness of each specimen was measured and in order to investigate existence and dimensional situation of surface micro-cracks, Chemical Etch + FPI and Thermal shock + FPI were performed. For determining micro-structural changes in ground specimens as a clarifier criteria in measuring the level of residual stress, a set of recrystallization processes were carried out on them and average grain size were measured. The results show, however, changing in depth of cut hasn't influenced on micro-cracks, quality of surface roughness has descended in terms of increasing the cutting depth.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.