The effect of streamwise slots on the interaction of a normal shock wave with a turbulent boundary layer has been investigated experimentally at a Mach number of 1.29. The surface-pressure distribution for the controlled interaction was found to feature a distinct plateau. This was caused by a change in shock structure from a typical unseparated normal shock-wave/boundary-layer interaction to a large bifurcated lambda-type shock pattern, which led to a reduction of total pressure losses. A strong spanwise variation of boundary-layer properties was observed downstream of the slots, whereas the modified shock structure was relatively two-dimensional. Surface flow visualization confirmed that the slots introduced a region of recirculation into the boundary layer, similar to passive control with uniform surface ventilation. Surface flow visualization revealed the presence of a pair of counter-rotating vortices, confirmed by crossflow velocity measurements. Because of the reduction of total pressure losses, streamwise slots can reduce aircraft wave drag at transonic cruise while incurring only small viscous penalties. A similar control device can also be of use in supersonic intakes where total pressure losses limit engine performance. The introduction of streamwise vorticity can be beneficial in delaying boundary-layer separations often encountered in intakes and on transonic wings. The device is also thought to be capable of delaying buffet onset. Nomenclature M = Mach number P = pressure U = streamwise velocity x = streamwise distance, mm y = vertical distance, mm z = spanwise distance, mm δ = boundary-layer thickness Subscripts S = surface static value 0 = total value 1 = upstream value 2 = downstream value

No abstract

No abstract

No abstract

No abstract

The effect of streamwise slots and grooves on a normal shock wave-turbulent boundary-layer interaction has been investigated experimentally at a Mach number of 1.3. The surface pressure distribution for the controlled interaction in the presence of slots featured a distinct plateau. This was due to a change in shock structure from a typical unseparated normal shock wave-boundary-layer interaction to a large bifurcated lambda type shock pattern. Velocity measurements downstream of the slots revealed a strong spanwise variation of boundary-layer properties, whereas the modified shock structure was found to be relatively two-dimensional. Cross flow measurements indicate that slots introduce streamwise vortices into the flow. When applied to an aerofoil, streamwise slots have the potential to reduce wave drag while incurring only small viscous penalties. In the presence of grooves the interaction was initially found to be significantly different. A bifurcated shock structure was observed but the trailing leg appeared stronger and featured a second lambda foot. Oil flow visualisation also revealed differences in the interactions, with the region of suction and blowing being limited to a smaller extent of the grooved control surface. The amount of crossflow present was reduced compared to the slotted control surface. By varying the internal geometry of the grooves it was found that the interaction could be modified to be similar to that in the presence of slots indicating that a more practical control device can be designed.