Laser Directed Energy Deposition (LDED) based metal additive manufacturing (MAM) built components have higher surface roughness resulting in the need for post-processing treatments. Laser polishing is one of the advanced post-processing techniques gaining significant attention to improve the surface quality of LDED built components. In the present work, the effect of continuous-wave laser polishing on the surface roughness of SS304L specimen manufactured by LDED is investigated. A thermo-physical model is developed to simulate the effect of laser polishing process parameters on the melt pool depth of the LDED built samples. The simulated melt pool depth is compared to experimentally measured melt pool depth and is found to be in good agreement. A maximum reduction of surface roughness from 21.3 µm to 9.0 µm (~ 57%) is achieved with laser polishing and the effect of process parameters on the surface roughness is investigated. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) mapping, and X-ray diffraction (XRD) are used to further characterise the laser polished surface. SEM-EDS analysis shows that the segregation is more evident in laser polished samples and XRD results show no extra peak generation due to laser polishing. The study paves a way to understand the effect of laser polishing on LDED built SS 304L structures.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.