The integration of wind turbines into modern power grids has significantly increased during the last decade. Wind turbines equipped with doubly fed induction generators (DFIGs) have been dominating wind power installation worldwide since 2002. In this paper, a superconducting magnetic energy storage (SMES) unit is proposed to improve the dynamic performance of a wind energy conversion system equipped with DFIG during voltage sag and voltage swell events. The converter and the chopper of the SMES unit are controlled using a hysteresis current controller and a fuzzy logic controller, respectively. Detailed simulation is carried out using MATLAB/SIMULINK software to highlight the impact of the SMES unit in improving the overall system performance under voltage sag and voltage swell conditions. Index Terms-Doubly fed induction generator (DFIG), fuzzy logic, hysteresis current controller (HCC), superconducting magnetic energy storage (SMES), voltage sag, voltage swell and wind energy conversion system (WECS).

No abstract

Wind energy is one of the premier renewable energy sources that have gained popularity during the last decade. Among the currently available wind energy conversion systems (WECS), doubly fed induction generator-based technology has been widely employed due to its superior advantageous. The key features of the DFIG-based WECS include its ability to capture more wind energy and support the grid with large reactive power during short disturbance events. On the other hand, DFIG is very sensitive to grid faults which affect its fault ride through (FRT) capability. Furthermore, extreme wind gust even for short durations may lead to the violation of the low voltage ride through (LVRT) threshold limits set by worldwide transmission line operators. This situation cannot be mitigated by the turbine blades pitch controller since the response of the pitch mechanical control is much slower than the rapid dynamic change in the wind speed during short duration of wind gust events. While DFIG FRT capability has been discussed in several papers in the literature, not much attention was given to the mitigation of the effects of extreme wind gust of short duration on the DFIG performance. In this paper, the effect of various levels of wind gust on the performance of a DFIG-based wind energy conversion grid-connected system is investigated and mitigated using a new controller for superconducting magnetic energy storage (SMES) unit. A combination of hysteresis current and fuzzy logic controllers is employed to control the voltage source converter and the DC-DC chopper interfacing the SMES coil with the investigated system. Simulation results reveal the effectiveness of the proposed SMES controller that can be easily implemented within existing as well as new WECS installations.INDEX TERMS Doubly fed induction generator, low voltage ride through, superconducting magnetic energy storage, wind gust.

The number of wind turbines connected to power grids has significantly increased during the last decade. This is mainly due to the convincing revolution in power electronic technology and the growing concern about greenhouse effect that is intensified due to the burning of fossil fuels. Variable-speed wind energy conversion systems (WECSs) such as doubly fed induction generators (DFIGs) are dominating the wind energy market due to their superior advantages over fixed-speed-based WECS which include more captured energy, less mechanical stress, and acoustical noise. DFIG is interfaced to the ac network through the grid-side voltage source converter (VSC) and rotor-side VSC to enable the variable-speed operation of the wind turbine and to provide reactive power support to the ac grid during disturbance events. Converter switching malfunction such as misfire and fire-through may influence the power dispatch capability of the DFIG. In this paper, a superconducting magnetic energy storage (SMES) unit is utilized to improve the power dispatch and dynamic performance of DFIG-based WECS during internal converter switching malfunctions such as misfire and fire-through faults. Simulation results without and with SMES connected to the system are presented, compared, and analyzed.Index Terms-Doubly fed induction generators (DFIGs), fire-through, misfire, superconducting magnetic energy storage (SMES).

Wind Turbine Generator (WTG) has become one of the most popular renewable-based power generation that is broadly connected to electricity grids worldwide. Till the year 2019, the total WTGs installed worldwide reached about 650.8GW. The WTG is interfaced to the electricity grid through power electronic converters with a proper control algorithm to facilitate a smooth power delivery as well as maintaining the system voltage and frequency stability during wind intermittency. However, power grids are usually subjected to load expansion which affects the stiffness of the grid and hence its stability. A weak electricity grid exhibits voltage instability that may affect the performance of WTGs and in some cases may lead to serious damages to the wind turbines and the entire system. In this paper, superconducting magnetic energy storage (SMES) technology based on fuzzy logic controller is implemented to effectively resolve this issue and improve the overall performance of WTGs. Hysteresis current and fuzzy logic-based control system is proposed to control the energy exchange between the SMES coil and the investigated system. Results show the effectiveness of the SMES to improve the overall system performance and along with the fault ridethrough capability of the doubly-fed induction generator (DFIG).INDEX TERMS DFIG, SMES, Low voltage ride through, Wind energy, Weak grid.

No abstract

Application of distributed wind energy conversion systems (WECS) in modern power systems and smart grids has significantly increased during the last decade. In particular, wind turbines equipped with doubly fed induction generator (DFIG) have dominated the market since 2004 as they represented about 55% of the worldwide total wind capacity during this year. This study investigates the application of superconducting magnetic energy storage (SMES) units to improve the dynamic performance of DFIG-based WECS during small and large disturbances in the grid side. A new control approach for the SMES unit using hysteresis current regulator and fuzzy logic is introduced. Detailed simulation results show that the proposed SMES controller is very effective in improving the dynamic performance of the WECS and is able to maintain its parameters within the safety margins of various grid codes during disturbance events considered in this study.

No abstract