No abstract

In this Letter we report the first experiments aimed at the simultaneous demonstration of the emittance compensation process and velocity bunching in a high brightness electron source, the SPARC photoinjector in INFN-LNF. While a maximum compression ratio up to a factor 14 has been observed, in a particular case of interest a compression factor of 3, yielding a slice current of 120 A with less than 2 microm slice emittance, has been measured. This technique may be crucial in achieving high brightness beams in photoinjectors aiming at optimized performance of short wavelength single-pass free electron lasers or other advanced applications in laser-plasma accelerators.

This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research and education use, including for instruction at the authors institution and sharing with colleagues.Other uses, including reproduction and distribution, or selling or licensing copies, or posting to personal, institutional or third party websites are prohibited. t r a c tA new facility named SPARC_LAB has been recently launched at the INFN National Laboratories in Frascati, merging the potentialities of the former projects SPARC and PLASMONX. We describe in this paper the status and the future perspectives at the SPARC_LAB facility.

The electron-positron collider DAÈNE, the Italian È factory, has been recently upgraded in order to implement an innovative collision scheme based on large crossing angle, small beam sizes at the crossing point, and compensation of beam-beam interaction by means of sextupole pairs creating a ''crab-waist'' configuration in the interaction region. Experimental tests of the novel scheme exhibited an increase by a factor of 3 in the peak luminosity of the collider with respect to the performances reached before the upgrade. In this Letter we present the new collision scheme, discuss its advantages, describe the hardware modifications realized for the upgrade, and report the results of the experimental tests carried out during commissioning of the machine in the new configuration and standard operation for the users. DOI: 10.1103/PhysRevLett.104.174801 PACS numbers: 29.27.Bd, 29.20.db, 29.27.Eg Pushing the luminosity of storage-ring colliders to unprecedented levels opens up unique opportunities for precision measurements of rare decay modes and extremely small cross sections, which are sensitive to new physics beyond the standard model.In high luminosity colliders with conventional collision schemes the key requirements to increase the luminosity are: very small vertical beta function y at the interaction point (IP), high beam intensity and large horizontal emittance " x and beam size x . However, y cannot be much smaller than the longitudinal rms bunch size (bunch length) z without incurring the ''hour-glass'' effect. Unfortunately, it is very difficult to shorten the bunch in a high current ring without exciting collective instabilities. Even then, the large beam current may result in high power losses, beam instabilities and dramatic increase of the wallplug power. These problems can be overcome with the recently proposed crab-waist (CW) scheme of beambeam collisions [1,2] where a substantial luminosity increase can be achieved without bunch length reduction and with moderate beam currents.The CW scheme has been successfully tested at the electron-positron collider DAÈNE, the Italian È factory [3,4] operating at the energy of 1020 MeV in the center of mass. After an upgrade including the implementation of this novel collision scheme, the specific luminosity at low beam currents has been boosted by more than a factor of 4, while the present peak luminosity is a factor of 3 higher than the maximum value obtained with the original configuration based on the standard collision scheme.The successful test has provided the opportunity to continue the DAÈNE physics program. Moreover, the advantages of the crab-waist collision scheme have triggered several collider projects exploiting its potential. In particular, physics and accelerator communities are discussing new projects of a SuperB factory [5,6] and a SuperTau-Charm factory [7] with luminosities about 2 orders of magnitude beyond those achieved at the present B-[8] and Tau-charm factories [9].In this Letter we briefly introduce the CW concept, shortly discuss ...

This report presents the conceptual design of a new European research infrastructure EuPRAXIA. The concept has been established over the last four years in a unique collaboration of 41 laboratories within a Horizon 2020 design study funded by the European Union. EuPRAXIA is the first European project that develops a dedicated particle accelerator research infrastructure based on novel plasma acceleration concepts and laser technology. It focuses on the development of electron accelerators and underlying technologies, their user communities, and the exploitation of existing accelerator infrastructures in Europe. EuPRAXIA has involved, amongst others, the international laser community and industry to build links and bridges with accelerator science — through realising synergies, identifying disruptive ideas, innovating, and fostering knowledge exchange. The Eu-PRAXIA project aims at the construction of an innovative electron accelerator using laser- and electron-beam-driven plasma wakefield acceleration that offers a significant reduction in size and possible savings in cost over current state-of-the-art radiofrequency-based accelerators. The foreseen electron energy range of one to five gigaelectronvolts (GeV) and its performance goals will enable versatile applications in various domains, e.g. as a compact free-electron laser (FEL), compact sources for medical imaging and positron generation, table-top test beams for particle detectors, as well as deeply penetrating X-ray and gamma-ray sources for material testing. EuPRAXIA is designed to be the required stepping stone to possible future plasma-based facilities, such as linear colliders at the high-energy physics (HEP) energy frontier. Consistent with a high-confidence approach, the project includes measures to retire risk by establishing scaled technology demonstrators. This report includes preliminary models for project implementation, cost and schedule that would allow operation of the full Eu-PRAXIA facility within 8—10 years.