ABSTRACT:The permittivity Ј and dielectric loss Љ for different ratios of an ethylene propylene diene monomer (EPDM)-chloroprene rubber (CR) blend ranging from 0 to 100 phr were measured over a frequency range from 400 Hz to 60 kHz. The measurements were carried out at room temperature (25°C). The values of Ј and Љ were found to decrease with increasing EPDM content in the EPDM-CR blend. The sample which possesses the best mechanical and electrical properties was a 50 EPDM-50 CR blend. This sample was chosen to be loaded with 40 phr of some white fillers, namely, calcium carbonate, silica, silitan z, and talc. From the electrical and mechanical investigations, it was found that the use of silica and calcium carbonate in these blends could improve these properties. The electrical and mechanical properties were also studied for the investigated blends loaded with both silica and calcium carbonate with different contents
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.