We report our studies on spectral sensitivity of meander-type, superconducting NbN thin-film single-photon detectors (SPDs), characterized by GHz counting rates of visible and near-infrared photons and negligible dark counts. Our SPDs exhibit experimentally determined quantum efficiencies ranging from ∼0.2% at the 1.55 μm wavelength to ∼70% at 0.4 μm. Spectral dependences of the detection efficiency (DE) at the 0.4 to 3.0-μm-wavelength range are presented. The exponential character of the DE dependence on wavelength, as well as its dependence versus bias current, is qualitatively explained in terms of superconducting fluctuations in our ultrathin, submicron-width superconducting stripes. The DE values of large-active-area NbN SPDs in the visible range are high enough for modern quantum communications.

The paper reviews the main aspects of nonequilibrium hot-electron phenomena in superconductors and various theoretical models developed to describe the hot-electron effect. We discuss implementation of the hot-electron avalanche mechanism in superconducting radiation sensors and present the most successful practical devices, such as terahertz mixers and direct intensity detectors, for far-infrared radiation. Our presentation also includes the novel approach to hot-electron quantum detection implemented in superconducting x-ray to optical photon counters.

The quantum cascade laser is a powerful, narrow linewidth, and continuous wave source of terahertz radiation. The authors have implemented a distributed feedback device in a spectrometer for high-resolution gas phase spectroscopy. Amplitude as well as frequency modulation schemes have been realized. The absolute frequency was determined by mixing the radiation from the quantum cascade laser with that from a gas laser. The pressure broadening and the pressure shift of a rotational transition of methanol at 2.519THz were measured in order to demonstrate the performance of the spectrometer.

Terahertz quantum cascade lasers have been investigated with respect to their performance as a local oscillator in a heterodyne receiver. The beam profile has been measured and transformed in to a close to Gaussian profile resulting in a good matching between the field patterns of the quantum cascade laser and the antenna of a superconducting hot electron bolometric mixer. Noise temperature measurements with the hot electron bolometer and a 2.5 THz quantum cascade laser yielded the same result as with a gas laser as local oscillator.

Superconducting properties of three series of amorphous W x Si 1x films with different thickness and stoichiometry were investigated by dc transport measurements in a magnetic field up to 9 T. These amorphous W x Si 1x films were deposited by magnetron cosputtering of the elemental source targets onto silicon substrates at room temperature and patterned in the form of bridges by optical lithography and reactive ion etching. Analysis of the data on magnetoconductivity allowed us to extract the critical temperatures, superconducting coherence lengths, magnetic penetration depths, and diffusion constants of electrons in the normal state as functions of film thickness for each stoichiometry. Two basic time constants were derived from transport and time-resolving measurements. A dynamic process of the formation of a hotspot was analyzed in the framework of a diffusion-based vortex-entry model. We used a two-stage diffusion approach and defined a hotspot size by assuming that the quasiparticles and normal-state electrons have the same diffusion constant. With this definition and these measured material parameters, the hotspot in the 5-nm-thick W 0.85 Si 0.15 film had a diameter of 107 nm at the peak of the number of nonequilibrium quasiparticles. Superconducting properties of three series of amorphous W x Si 1−x films with different thickness and stoichiometry were investigated by dc transport measurements in a magnetic field up to 9 T. These amorphous W x Si 1−x films were deposited by magnetron cosputtering of the elemental source targets onto silicon substrates at room temperature and patterned in the form of bridges by optical lithography and reactive ion etching. Analysis of the data on magnetoconductivity allowed us to extract the critical temperatures, superconducting coherence lengths, magnetic penetration depths, and diffusion constants of electrons in the normal state as functions of film thickness for each stoichiometry. Two basic time constants were derived from transport and time-resolving measurements. A dynamic process of the formation of a hotspot was analyzed in the framework of a diffusion-based vortex-entry model. We used a two-stage diffusion approach and defined a hotspot size by assuming that the quasiparticles and normal-state electrons have the same diffusion constant. With this definition and these measured material parameters, the hotspot in the 5-nm-thick W 0.85 Si 0.15 film had a diameter of 107 nm at the peak of the number of nonequilibrium quasiparticles.

We present the measurements and the theoretical model of the frequency-dependent noise temperature of a superconductor lattice-cooled hot-electron bolometer mixer in the terahertz frequency range. The increase of the noise temperature with frequency is a cumulative effect of the nonuniform distribution of the high-frequency current in the bolometer and the charge imbalance, which occurs at the edges of the normal domain and at the contacts with normal metal. We show that under optimal operation the fluctuation sensitivity of the mixer is determined by thermodynamic fluctuations of the noise power, whereas at small biases there appears additional noise, which is probably due to the flux flow. We propose the prescription of how to minimize the influence of the current distribution on the mixer performance.

No abstract

The spectral detection efficiency and the dark count rate of superconducting nanowire singlephoton detectors (SNSPD) has been studied systematically on detectors made from thin NbN films with different chemical compositions. Reduction of the nitrogen content in the 4 nm thick NbN films results in a more than two orders of magnitude decrease of the dark count rates and in a red shift of the cut-off wavelength of the hot-spot SNSPD response. The observed phenomena are explained by an improvement of uniformity of NbN films that has been confirmed by a decrease of resistivity and an increase of the ratio of the measured critical current to the depairing current. The latter factor is considered as the most crucial for both the cut-off wavelength and the dark count rates of SNSPD. Based on our results we propose a set of criteria for material properties to optimize SNSPD in the infrared spectral region.