Calculation of ionic equilibria in the reaction system for synthesis of PbSe thin films was carried out. Three reaction systems containing the following combinations of reagents were considered: sodium citrate with liquid ammonia and sodium selenosulfate (system 1) or selenourea (system 2) used as chalcogenizer, ethilendiamine, sodium acetate and selenourea (system 3).The main lead complex compoundsprevented the fast PbSe formation in system 1 and 2 in region of pH of intensive selenosulfate and selenourea decomposition were hydroxo-citrate complexes. In the system 3 complexes with ethilendiamine and acetate-ions played the most significant role. For evaluating the deposition conditions of the main and impurity phases (metal hydroxides and cyanamides) by thermodynamic calculations taking into account the sizes of critical nucleis, the boundary conditions and regions of formation of PbSe, Pb(OH)2, PbCN2 in the studied reaction systems were found. The calculation results are presented in the form of three-dimensional dependencies in the coordinates “indicator of the initial concentration of the metal salt – pH of the solution – ligand concentration” and “indicator of the initial concentration of the metal salt – pH of the solution – concentration of the chalcogenizer”. Based on the calculations and preliminary experiments, the compositions of the discussed reaction mixtures were formed for the chemical bath deposition of PbSe films, which, in addition to the main components, included a dopant in the form of ammonium iodide. In the synthesis process at a temperature of 353 K (system 1 and 2) for 60 minutes and 308 K for 90 minutes (system 3), using all the studied reaction systems on glass substrates, homogeneous PbSe layers with a thickness of ~500 to ~700 nm were obtained. The ratio between the main elements of Pb and Se in the film varies between 0.98-1.32, and the iodine content is 7-11 at.% depending on the composition of the reaction bath.
The calculating of ionic equilibria in the system «Pb(CH3COO)2 - CdCl2 - Na3C6H5O7 - (NH3)2(CH2)2 - N2H4CS» allowed us to find conditions and concentration regions of PbS and CdS co-deposition. The determined conditions provided the CBD obtaining of CdxPb1−xS (0 ≤ x ≤ 0.033) substitutional solid solutions films with a cubic structure B1 (space group Fm ) with the grains preferred orientation (200). We established the evolution of the surface morphology of the synthesized films from cubic crystallites to hierarchical structure of globular aggregates by scanning electron microscopy. A quantitative analysis of diffraction patterns showed a decrease of microstrains in CdxPb1−xS films by a about factor of 3 with an increase of the cadmium chloride concentration in the reaction mixture from 0.005 to 0.14 mol/l. The excess of the cadmium content, established by EDX analysis, in the studied films as compared to its content in the solid solution is associated with the additional formation of the amorphous CdS phase up to 72 mol %.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.