In this paper, we report a direct comparison between coupled resonator optical waveguides (CROWs) and photonic crystal waveguides (PhCWs), which have both been exploited as tunable delay lines. The two structures were fabricated on the same silicon-on-insulator (SOI) technological platform, with the same fabrication facilities and evaluated under the same signal bit-rate conditions. We compare the frequency- and time-domain response of the two structures; the physical mechanism underlying the tuning of the delay; the main limits induced by loss, dispersion, and structural disorder; and the impact of CROW and PhCW tunable delay lines on the transmission of data stream intensity and phase modulated up to 100 Gb/s. The main result of this study is that, in the considered domain of applications, CROWs and PhCWs behave much more similarly than one would expect. At data rates around 100 Gb/s, CROWs and PhCWs can be placed in competition. Lower data rates, where longer absolute delays are required and propagation loss becomes a critical issue, are the preferred domain of CROWs fabricated with large ring resonators, while at data rates in the terabit range, PhCWs remain the leading technology

A century after the first optical cavity, coupled resonator optical waveguides (CROWs) were conceived as a new way to guide light on a photonic chip. Controlling chains of coupled resonators to let light propagate through, with a reduced speed and enhanced intensity, boosting light-matter interaction while keeping information undistorted: this was the fascinating promise of CROWs, but also one of the most ambitious challenges ever set for integrated optics. The first decade of the history of CROWs is discussed in this review, from the original idea to recent applications, panning through the technological platforms that have been employed to realize these structures. Design criteria and management issues, fundamental limits, and sensitivity to fabrication tolerances are discussed to make the reader aware of the performance of state-of-the-art CROWs and to provide a realistic perspective of future applicative horizons.

We report on the direct observation of backscattering induced by sidewall roughness in high-index-contrast optical waveguides based on total internal reflection. Our results demonstrate that backscattering is one of the most severe limiting factors in state-of-the art silicon on insulator nanowires employed in densely integrated photonics. We also derive the general relationship between backscattering and geometrical and optical parameters of the waveguide. Further, the role of roughness in polarization rotation and coupling with higher-order modes is pointed out.

Wave mixing inside optical resonators, while experiencing a large enhancement of the nonlinear interaction efficiency, suffers from strong bandwidth constraints, preventing its practical exploitation for processing broad-band signals. Here we show that such limits are overcome by the new concept of travelling-wave resonant four-wave mixing (FWM). This approach combines the efficiency enhancement provided by resonant propagation with a wide-band conversion process. Compared with conventional FWM in bare waveguides, it exhibits higher robustness against chromatic dispersion and propagation loss, while preserving transparency to modulation formats. Travelling-wave resonant FWM has been demonstrated in silicon-coupled ring resonators and was exploited to realize a 630-μm-long wavelength converter operating over a wavelength range wider than 60 nm and with 28-dB gain with respect to a bare waveguide of the same physical length. Full compatibility of the travelling-wave resonant FWM with optical signal processing applications has been demonstrated through signal retiming and reshaping at 10 Gb s−1

Coupled-ring resonator-based slow light structures are reported and discussed. By combining the advantages of high index contrast silicon-on-insulator technology with an efficient thermo-optical activation, they provide an on-chip solution with a bandwidth of up to 100 GHz and a slowdown factor of up to 16, as well as a continuous reconfiguration scheme and a fine tunability. The performance of these devices is investigated in detail for both static and dynamic operation, in order to evaluate their potential in optical signal processing applications at high bit rate. The main impairments imposed by fabrication imperfections are also discussed in relation to the slowdown factor. In particular, the analysis of the impact of backscatter, disorder and two-photon absorption on the device transfer function reveals the ultimate limits of these structures and provides valuable design rules for their optimization.