(2008)]. Here, IEM is modified for a wider resolvability range and implemented on the FPGA of the new SPAD array imager. We experimentally demonstrate that the dynamic range and accuracy of calculated lifetimes of this new camera is suitable for widefield FLIM applications by imaging a variety of test samples, including various standard fluorophores covering a lifetime range from 1.6ns to 16ns, microfluidic mixing of fluorophore solutions, and living fungal spores of Neurospora Crassa. The calculated lifetimes are in a good agreement with literature values. Real-time fluorescence lifetime imaging is also achieved, by performing parallel 32 × 16 lifetime calculations, realizing a compact and low-cost FLIM camera and promising for bigger detector arrays. Kaminski, "Application of frequency-domain Fluorescence Lifetime Imaging Microscopy as a quantitative analytical tool for microfluidic devices," Opt. Express 14(12), 5456-5467 (2006), http://www.opticsexpress.org/abstract.cfm?URI=oe-14-12-5456. 27. R. A. Colyer, C. Lee, and E. Gratton, "A novel fluorescence lifetime imaging system that optimizes photon efficiency," Microsc. ©2010 Optical Society of America
The pore size distribution (PSD) and the pore-network connectivity of a porous material determine its properties in applications such as gas storage, adsorptive separations, and catalysis. Methods for the characterization of the pore structure of porous carbons are widely used, but the relationship between the structural parameters measured and the real structure of the material is not yet clear. We have evaluated two widely used and powerful characterization methods based on adsorption measurements by applying the methods to a model carbon which captures the essential characteristics of real carbons but (unlike a real material) has a structure that is completely known. We used three species (CH4, CF4, and SF6) as adsorptives and analyzed the results using an intersecting capillaries model (ICM) which was modeled using a combination of Monte Carlo simulation and percolation theory to obtain the PSD and the pore-network connectivity. There was broad agreement between the PSDs measured using the ICM and the geometric PSD of the model carbon, as well as some systematic differences which are interpreted in terms of the pore structure of the carbon. The measured PSD and connectivity are shown to be able to predict adsorption in the model carbon, supporting the use of the ICM to characterize real porous carbons.
Adsorption of a model nitrogen vapor on a range of complex nanoporous carbon structures is simulated by grand canonical Monte Carlo simulation for a single subcritical temperature above the bulk freezing point. Adsorption and desorption isotherms, heats of adsorption, and three-dimensional singlet distribution functions (SDFs) were generated. Inspection of the SDFs reveals significant levels of solidlike adsorbate at saturation even in the most complex of the microporous solids considered. This strongly suggests that solidlike adsorbate will also occur for simple subcritical vapors adsorbed on real noncrystalline solids such as microporous carbons at temperatures above the bulk freezing point, supporting indirect experimental observations. The presence of significant levels of solidlike adsorbate has implications for characterization of microporous solids where adsorbate density is used (e.g., determination of pore volume from loading). Detailed consideration of the SDF at different loadings for a model microporous solid indicates solidlike adsorbate forms at distributed points throughout the pore space at pressures dependent on the nature of the local porosity. The nature of the local porosity also dictates the freezing mechanism. A local freezing/melting/refreezing process is also observed. Introduction of mesoporosity into the model causes hysteresis between the adsorption and desorption isotherms. Adsorption in the hysteresis loop occurs by a series of local condensation events. It appears as if the presence of adjacent microporosity and/or adsorbate within it affects the pressure at which these events occur. Reversal of the condensation during desorption occurs throughout the mesoporosity at a single pressure; this pressure is unaffected by the presence of adjacent microporosity or the adsorbate within it. It is also shown that the empirical concept of “pore size” is not consistent for describing adsorption in the complex solids considered here. A new concept is, therefore, proposed that seeks to account for the factors that affect local adsorption energy: local geometry, microtexture, surface atom density, and surface chemistry.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.