In this work, the results of studies on the preparation of carbon fibres (Tenax HTA40) for composites with an aluminium alloy matrix are presented. In the first step of preparation, the epoxy sizing was removed to assure adhesion of the Ni-P coating as a barrier to prevent the formation of brittle Al4C3. Removal of the sizing also decreases the risk of gas formation underneath the metal coatings in contact with the liquid metal matrix. Methods of sizing removal included annealing in air (300-600°C) and dissolving in solvents (acetone, toluene) and in inorganic solutions (HNO3, H2O2, NaOH), followed by SnCl2/PdCl2 activation are described. It was found that the chemical removal of epoxy sizing from carbon fibres is not an appropriate method for further studies on the electroless metallisation of carbon fibres. The thermal treatments in air atmosphere seem to be more useful for removing epoxy sizing. The result of the present studies was the optimisation of the temperature of the annealing of carbon fibres as 400-500oC. The morphology of the carbon fibre surface before and after sizing removal was characterised using SEM and in terms of the mass loss. A glycine-buffered electroless bath was used for the Ni-P coating of the fibre with a wide range of deposition rates and alloy compositions (2-12 wt% P). An advantage of electroless plating is that the process is carried out without electrical current. The coating is deposited as the result of the controlled reduction, which is catalysed by the metal being deposited. Two different pH values of metallisation baths were selected (pH=4.5 and pH=8.5). The time of Ni-P deposition ranged from 5 to 30 minutes. The process parameters were optimised for Ni-P coatings on 1D carbon fibres and 2D/3D woven fabrics. It was found that the process developed can be used for 2D and 3D woven fabrics.
Związki chromu(VI) są ciałami stałymi o budowie krystalicznej, o zróżnicowanej rozpuszczalności w wodzie. Związki Cr(VI) są stosowane w obróbce powierzchni metalowych w celu zabezpieczenia przed korozją lub w celach dekora- cyjnych (chromowanie, anodowanie), jako dodatek do stali nierdzewnej chromowej, w syntezie chemicznej jako silny środek utleniający i jako katalizator, do produkcji niektórych pigmentów, inhibitorów korozji, środków do ochrony drewna. Powstają również podczas spawania i cięcia plazmowego. Pracownicy mogą być narażeni na związki Cr(VI) w środowisku pracy drogą inhalacyjną, pokarmową i przez skórę. Na terenach uprzemysłowionych możliwe jest nara- żenie pozazawodowe, np. przez wodę do picia, kontakt z glebą lub innymi mediami zanieczyszczonymi tymi związka- mi. W Polsce w latach 2005-2018 na podstawie informacji przesłanych do Centralnego Rejestru Danych o Narażeniu na Substancje, Preparaty, Czynniki lub Procesy Technologiczne o Działaniu Rakotwórczym lub Mutagennym prowa- dzonego przez IMP w Łodzi w środowisku zawodowym najbardziej rozpowszechniony był dichromian(VI) potasu (zgłaszało go ponad 500 zakładów pracy, a liczba narażonych osób przekraczała 5 tys.). Ponad 1 tys. narażonych osób zgłaszano również w przypadku tlenku chromu(VI), chromianu(VI) potasu oraz innych związków chromu(VI). Zdecydowaną większość zgłoszonych do rejestru stanowisk pracy, na których występowały związki Cr(VI), stanowiły stanowiska laboratoryjne (75%), ponad 10% stanowiska pracy związane z galwanizacją lub trawieniem powierzchni, a około 4% stanowiska spawaczy. W 2018 r. rozporządzeniem MRPiPS wprowadzono dla wszystkich związków Cr(VI) wartość NDS wynoszącą 0,01 mg/m3. W 2019 r. zgodnie z danymi GIS na stężenia >0,1 NDS ÷ 0,5 NDS było narażo- nych 640 pracowników, >0,5 NDS ÷ NDS – 146 pracowników, a powyżej wartości NDS – 48 pracowników. Przewlekłe narażenie zawodowe na związki Cr(VI) może powodować skutki związane ze żrącym i drażniącym działaniem tych substancji (zmiany skórne, objawy ze strony dróg oddechowych, zaburzenia funkcji nerek) oraz wystąpienie raka płuca i zatok przynosowych. Okres latencji wystąpienia raka płuca u pracowników narażonych zawodowo na związki Cr(VI) wynosi około 20 lat. U ludzi dowody działania związków Cr(VI) na rozrodczość są niejednoznaczne, chociaż są badania wskazujące na ryzyko zmniejszenia jakości nasienia, które odnotowano w grupie spawaczy. Przy ustalaniu wartości NDS za skutek krytyczny działania związków Cr(VI) przyjęto działanie rakotwórcze na płuca. Dla związków Cr(VI) przyjęto wartość NDS na poziomie 0,005 mg Cr(VI)/m3 bez ustalenia wartości chwilowej NDSCh. Zapropono- wana wartość NDS 0,005 mg Cr(VI)/m3 zabezpieczy pracowników również przed działaniem drażniącym związków Cr(VI) obecnych w powietrzu środowiska pracy. Przyjęto następujące oznakowanie związków Cr(VI): Carc.*, Muta.*, Ft (Repr.)*, C(r-r)*, I* oraz A*, których kategorię należy ustalić zgodnie z tabelą 3. załącznika VI do rozporządzenia Parlamentu Europejskiego i Rady WE nr 1272/2008 z dnia 16 grudnia 2008 r. (Dz. Urz. WE L 353, 1-1355 z późn. zm.).
Masa reakcyjna 5-chloro-2-metylo-2H-izotiazol-3-onu i 2-metylo-2H-izotiazol-3-onu (3: 1), zwana dalej CIT/MIT, jest jasnożółtym krystalicznym ciałem stałym, bardzo dobrze rozpuszczalnym w wodzie. Jest stosowana jako środek biobójczy w płynach technologicznych oraz jako konserwant w różnorodnych produktach konsumenckich. Skutki przewlekłego narażenia ludzi były badane prawie wyłącznie pod kątem potencjału działania uczulającego na skórę. Skutki przewlekłego narażenia zwierząt wynikały przede wszystkim z działania drażniącego. Skutkiem krytycznym CIT/MIT jest działanie drażniące na błony śluzowe nosa. Podstawą do obliczenia proponowanej wartości NDS były wyniki 13-tygodniowego eksperymentu inhalacyjnego na szczurach, w którym wyznaczono wartość NOAEC na poziomie 0,34 mg/m3. Do obliczenia wartości NDS przyjęto współczynnik niepewności A = 2 ze względu na różnice wrażliwości osobniczej u ludzi, pozostałe współczynniki przyjęto równe 1. Zaproponowano przyjęcie wartości NDS równej 0,2 mg/m3. Ze względu na działanie drażniące proponuje się przyjęcie wartości chwilowej NDSCh wynoszącej 0,4 mg/m3. Dostępne dane są niewystarczające do ustalenia wartości dopuszczalnego stężenia w materiale biologicznym DSB. Zaproponowano oznakowanie CIT/MIT: A – substancja uczulająca; C – substancja żrąca; Skóra – wchłanianie substancji przez skórę może być tak samo istotne jak przy narażeniu drogą oddechową. Zakres tematyczny artykułu obejmuje zagadnienia zdrowia oraz bezpieczeństwa i higieny środowiska pracy będące przedmiotem badań z zakresu nauk o zdrowiu oraz inżynierii środowiska.
Masa poreakcyjna 5-chloro-2-metylo-2H-izotiazol-3-onu i 2-metylo-2H-izotiazol-3-onu (3: 1), zwana dalej CIT/MIT, jest jasnożółtym krystalicznym ciałem stałym, bardzo dobrze rozpuszczalnym w wodzie. Jest stosowana jako środek biobójczy w płynach technologicznych oraz jako konserwant w różnorodnych produktach konsumenckich. Skutki przewlekłego narażenia ludzi były badane prawie wyłącznie pod kątem potencjału działania uczulającego na skórę. Skutki przewlekłe-go narażenia zwierząt wynikały przede wszystkim z działania drażniącego. Skutkiem krytycznym CIT/MIT jest działanie drażniące na błony śluzowe nosa. Podstawą do obliczenia proponowanej wartości NDS były wyniki 13-tygodniowego eks-perymentu inhalacyjnego na szczurach, w którym wyznaczono wartość NOAEC na poziomie 0,34 mg/m3. Do obliczenia wartości NDS przyjęto współczynnik niepewności A = 2 ze względu na różnice wrażliwości osobniczej u ludzi, pozostałe współczynniki przyjęto równe 1. Zaproponowano przyjęcie wartości NDS równej 0,2 mg/m3. Ze względu na działanie drażniące proponuje się przyjęcie wartości chwilowej NDSCh wynoszącej 0,4 mg/m3. Dostępne dane są niewystarczające do ustalenia wartości dopuszczalnego stężenia w materiale biologicznym DSB. Zaproponowano oznakowanie CIT/MIT: A – substancja uczulająca; C – substancja żrąca; Skóra – wchłanianie substancji przez skórę może być tak samo istotne jak przy narażeniu drogą oddechową. Zakres tematyczny artykułu obejmuje zagadnienia zdrowia oraz bezpieczeństwa i higieny środowiska pracy będące przedmiotem badań z zakresu nauk o zdrowiu oraz inżynierii środowiska.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.