In free-space optical link (FSOL), atmospheric turbulence causes fluctuations in both intensity and phase of the received beam and impairing link performance. The beam motion is one of the main causes for major power loss. This paper presents an investigation on the performance of two types of controller designed for aiming a laser beam to be at a particular spot under dynamic disturbances. The multiple experiment observability nonlinear input-output data mapping is used as the principal components for controllers design. The first design is based on the Taguchi method while the second is artificial neural network method. These controllers process the beam location information from a static linear map of 2D plane: optoelectronic position detector, as observer, and then generate the necessary outputs to steer the beam with a microelectromechanical mirror: fast steering mirror. The beam centroid is computed using monopulse algorithm. Evidence of suitability and effectiveness of the proposed controllers are comprehensively assessed and quantitatively measured in terms of coefficient of correlation, correction speed, control exactness, centroid displacement, and stability of the receiver signal through the experimental results from the FSO link setup established for the horizontal range of 0.5 km at an altitude of 15.25 m. The test field type is open flat terrain, grass, and few isolated obstacles.
Over the last two decades, free-space optical communication (FSOC) has become more and more interesting as an adjacent and/or alternative to radio frequency (RF) and optical fiber communications. The optical wave propagation in the FSOC channel is severely affected by atmospheric parameters, and it leads to the degradation of the data transmission quality and reliability. Among the various atmospheric effects, the beam wandering is the main cause of major power loss and cannot be solved without the incorporation of the beam centroid stabilization system. Therefore, designing a suitable opto-electronic assembly with a beam wandering mitigation system becomes significant to improve the performance of the FSOC system. A FSOC experimental setup is developed for the link range of 0.5 km in the college campus. A neural controller is designed for beam wandering mitigation. The neural controller processed the beam pointing (beam location) information obtained from an opto-electronic position detector (OPD) and then generated the necessary control outputs to the fast steering mirror (FSM) to steer the beam in the counter-direction to mitigate the beam wander at the receiver station. New design approach and architecture development for the implementation of the designed neural controller in the field-programmable gate array (FPGA) to mitigate the beam wandering are presented. The investigations on the performance of the neural controller in aiming a laser beam to be at a particular point on the detector plane are tested under dynamic disturbances generated at the transmitter in addition to the atmospheric effects through which the maximum correction capability of the developed neural controller is examined. Evidence of the suitability and the effectiveness of the proposed neural controller is evaluated in terms of beam centroid displacement, power spectral density (PSD), radial displacement on a 2D plane, effective scintillation index (ESI), Q-factor, and bit error rate (BER). The beam wandering range of −0.13 to +0.16 mm, maximum of 55 dB disturbance band attenuation with a frequency range of 0 Hz through 2 kHz, ESI of 0 to 0.15, Q-factor of 6, and BER of 6.45 × 10 −9 are achieved due to the incorporation of the developed neural controller in different real-world environmental conditions.
Atmospheric parameters strongly affect the performance of free-space optical communication (FSOC) systems when the optical wave is propagating through the inhomogeneous turbulence transmission medium. Developing a model to get an accurate prediction of the atmospheric turbulence strength (C(n)(2)) according to meteorological parameters (weather data) becomes significant to understand the behavior of the FSOC channel during different seasons. The construction of a dedicated free-space optical link for the range of 0.5 km at an altitude of 15.25 m built at Thanjavur (Tamil Nadu) is described in this paper. The power level and beam centroid information of the received signal are measured continuously with weather data at the same time using an optoelectronic assembly and the developed weather station, respectively, and are recorded in a data-logging computer. Existing models that exhibit relatively fewer prediction errors are briefed and are selected for comparative analysis. Measured weather data (as input factors) and C(n)(2) (as a response factor) of size [177,147×4] are used for linear regression analysis and to design mathematical models more suitable in the test field. Along with the model formulation methodologies, we have presented the contributions of the input factors' individual and combined effects on the response surface and the coefficient of determination (R(2)) estimated using analysis of variance tools. An R(2) value of 98.93% is obtained using the new model, model equation V, from a confirmatory test conducted with a testing data set of size [2000×4]. In addition, the prediction accuracies of the selected and the new models are investigated during different seasons in a one-year period using the statistics of day, week-averaged, month-averaged, and seasonal-averaged diurnal Cn2 profiles, and are verified in terms of the sum of absolute error (SAE). A Cn2 prediction maximum average SAE of 2.3×10(-13) m(-2/3) is achieved using the new model in a longer range of dynamic meteorological parameters during the different local seasons.
A dedicated Free Space Optical Link (FSOL) for the range of 0.5 km at an altitude of 15.25 m is established and explained. The power levels of the received signal with meteorological parameters are continuously measured using the opto-electronic assembly and developed weather station respectively and stored in a computer. The existing models selected for comparative analysis are briefed. Measured meteorological parameters and optical attenuation of size [2000 Â 4] are used for linear regression analysis as well as to design the mathematical models more suitable at the test field. In addition, the prediction accuracy of the proposed and selected models during different seasons in one-year period are investigated and validated in terms of RMSE. The average Root Mean Square Error (RMSE) of 0.041 dB/km for the optical attenuation is achieved in the longer range dynamic of meteorological parameters during different local seasons.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.