A method for evaluating the mean effective gain (MEG) of mobile antennas in line-of-sight (LOS) street microcells with low base station antennas is investigated. The received power patterns of incident radio waves along typical streets measured in actual street microcells in urban areas of Tokyo are presented to clarify the proper distribution model for the incident radio waves. A two-dimensional statistical distribution model is proposed based on the measured received power patterns for the incident radio waves that follow a Gaussian distribution in the azimuth angle, but are concentrated in the horizontal plane in the elevation angle. The two-dimensional theoretical expression of the MEG that consists of the incident distribution model function and the radiation patterns in the horizontal plane of the mobile antennas is derived to evaluate easily the MEG. We show that the MEG values in street microcells are not defined as only one value and form the MEG pattern because the MEG values are changed by the relative direction of the radio waves arriving at the mobile station antennas. The measured and calculated MEG values (MEG patterns) of the whip antennas used in the experiments are in good agreement. The average error between the measured and calculated MEG values is within approximately 4.5 dB at maximum. The results show that the MEG degradation of the mobile station antennas due to the effect of the human body is properly evaluated by the proposed distribution model. The proposed statistical distribution model is valid and effective in both estimating the MEG values of mobile antennas and designing the LOS street microcell systems with low base station antennas.Index Terms-Line-of-sight (LOS) street microcells, low base station antennas, mean effective gain (MEG), mobile antennas, statistical distribution model of incoming radio waves.

No abstract

Proposed is a concept of a directional multi-band antenna employing frequency selective surfaces (FSSs). To confirm the feasibility of the concept, the proposal is implemented by combining a metal reflector, two FSSs that act as frequency filters, and a multi-band radiator. The proposed triple-band antenna can radiate at 800 MHz (the metal reflector or FSS 1), 2 GHz (FSS 2), and 4 GHz (FSS 3). FSS 2 passes waves at one frequency band (800 MHz) and reflects all other bands, and FSS 3 passes waves at two frequency bands (800 MHz/2 GHz) and reflects all other bands. Beam control is easy since all that is needed is to change FSS size and/or the distance between the radiator and metal reflector/FSS. Electromagnetic field simulations and measurements demonstrate good directivity in the frequency bands of 800 MHz, 2 GHz and 4 GHz.

SUMMARY This paper proposes a sector base station antenna for mobile wireless communication systems employing multiple woodpile metamaterial reflectors and a multiband radiator that establishes the same beamwidth in the horizontal plane for more than two frequency bands. Electromagnetic Band Gap (EBG) characteristics of each metamaterial reflector can be controlled through structural parameters of the woodpile reflector, e.g., the rod width and rod spacing. As an example of the proposed antenna, a design for a triple-frequency-band antenna that radiates at 800 MHz, 2 GHz, and 4 GHz is shown. The algorithm used to adjust the beamwidth of the proposed antenna is newly introduced and adjusts the beamwidth to be the same for each band using the rod width of the woodpile. A prototype of the proposed antenna has the approximately 90 • beamwidth in the horizontal plane at the three frequencies, and the measurement results agree well with the electromagnetic field simulation results. key words: sector base station antenna, multiband antenna, metamaterial, electromagnetic band gap (EBG) characteristics

No abstract

No abstract

No abstract

No abstract