Conceptually new methods of hydrate formation are proposed. The first one is based on the shock wave impact on a water-bubble medium. It is shown that the hydrate formation rate in this process is typically very high. A gas hydrate of carbon dioxide was produced. The process was experimentally studied using various initial conditions, as well as different external action magnitudes. The obtained experimental data are in good agreement with the proposed model. Other methods are based on the process of boiling liquefied gas in an enclosed volume of water (explosive boiling of a hydrating agent and the organization of cyclic boiling-condensation process). The key features of the methods are the high hydrate formation rate combined with a comparatively low power consumption leading to a great expected efficiency of the technologies based on them. The set of experiments was carried out. Gas hydrates of refrigerant R134a, carbon dioxide and propane were produced. The investigation of decomposition of a generated gas hydrate sample was made. The criteria of intensification of the hydrate formation process are formulated.
The model of gas bubble growth in high-viscous gas-saturated magmatic melt, subjected to rapid decompression, is presented in the current study. It is shown that consideration of unsteady character of the process is extremely important in a wide range of supersaturation. The analytical solution is found for the profile of dissolved gas concentration and the rate of bubble growth. The model of kinetics of overall degassing is developed. This model is based on distinguishing the so-called "forbidden" zone in the melt volume with suppressed formation of the new nucleation sites. The simple analytical dependences of the number of nucleating bubbles and typical nucleation time on the value of initial decompression were derived together with time dependence of volumetric concentration of the gas phase. Our results match the available experimental data.
A thermodynamical model of filament growing when a current pulse via memristor flows is introduced. The model is the boundary value problem, which includes nonstationary heat conduction equation with non-linear Joule heat source, Poisson equation, and Shockley-Read-Hall equations taking into account strong electron-phonon interactions in trap ionization and charge transport processes. The charge current, which defines the heating in the model, depends on the rate of the oxygen vacancy generation. The latter depends on the local temperature. The solution of the introduced problem allows one to describe the kinetics of the switch process and the final filament morphology.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.