Еfficiency increase of powdered coal application at hot metal production and limestone calcination under unstable technology conditions

Abstract

Operation of Ukraine ferrous metallurgy under conditions of dependence on import and instability of energy carriers supply, shortage of investments in modernization of production equipment, make the matter of cooperation between steel-works and research organization particularly actual. Basic results of cooperation between Z.I. Nekrasov Institute of Ferrous metallurgy, NAN of Ukraine and Dnepr steel-works in 2017–2019 on blast sfurnace operation pefection and technology of powdered coal injection into rotating limestone calcination furnaces. Results of the finding of the powdered coal optimal consumption shown, which ensure a high efficiency of the coke substitution, reaching of maximum possible blast furnace productivity as well as satisfactory utilization degree of the reducing gas ability. Results of implementation of a complex of measures presented, which ensure a rational distribution of the powdered coal by BF air tuyeres for making the heat conditions of the tuyere zone even by the blast furnace circle. Efficiency of application of technology of joint injection the powdered coal and natural gas was shown, which is achieved by improving the powdered coal combustion conditions in case of increase their mixing degree. Recommendations quoted for blast furnaces starting-up after their idling for a period exceeding the permissible one, without tapping the plug hot metal. The recommendations ensure an accident-free putting a blast furnace into operation followed by reaching planned parameters. Results of usage sensors information, measuring temperature of gas flow above the charge surface presented. The results allow to prove the correction of blast furnace charging mode by an expert module, generating correction impact to support control actions by technological personal. A complex of measures formed to prevent a disturbance of a blast furnace running in case of powdered coal injection in an amount exceeding 140 kg/t of hot metal and without application of special washover materials. The results of efficiency of the mastered technology, envisaging application manganese-bearing materials at a constant base, were shown. Results of diagnostics of workability of the facility for powdered coal injection into rotating limestone calcinating furnace presented, followed by elaboration recommendation on correction parameters of injection facility operation.