Аnalysis of energy saving methods servic-ing airfields and airplanes

Abstract

Problem. The problem is an integral part of developing the concept of forming a standard range of transport and technological hydrophilic modular means for maintenance of airfields and aircraft. Goal. The goal is development of scientifically sound recommendations for determining the rational parameters of the hydraulic system with automation of control and energy saving during operation of modular vehicles for maintenance of airfields and aircraft, taking into account the potential of domestic engineering and critical imports of units and assemblies. Methodology. The methods include analysis of energy saving methods in hydraulic fluid power of mobile machines according to manufacturers' catalogs and industrial examples taking into account the needs of modular vehicles for maintenance of airfields and aircraft, in particular, taking into account the creation of modern hydraulic devices and circuit solutions in hydraulic drives with throttle and machine control and automatic regulators of change of hydraulic fluid power. Results. It is established that in hydraulic drives with throttle control and pumps with unregulated working volume, throttles on parallel flow and three-wire flow regulators or LS and LUDV modern systems are used; automatic pressure and flow regulators are used with pumps with adjustable displacement; in machine-controlled hydraulic drives through the use of pumps and hydraulic motors with adjustable displacement and hydraulic automation; by energy recovery during operation and bench tests of hydraulic drives; at the design stage of hydraulic drives, when the static analysis is performed in terms of efficiency and dynamic to reduce the loads on the starting modes of operation; and also at designing lay the effective circuit technical decisions promoting energy saving; directly in operation due to high-quality working fluids, heat exchange systems and filtration. Originality. The classification of methods of energy saving in volumetric hydraulic drives of mobile machines is made and examples of application of some means which are planned for introduction in transmissions and the technological equipment of cars for service of aerodromes and planes are resulted. Practical value. The possibility of a rational selection of axial-piston domestic hydraulic machines for the development of hydraulic drives for airfields and aircraft is proven.