Wear Degree Quantification of Pin Connections Using Parameter-Based Analyses of Acoustic Emissions

Abstract

Pin connections are commonly used in many engineering fields, and continuous operation may cause severe wear on the pins and may lead to their eventual fracture, if undetected. However, a reliable nonintrusive real-time method to monitor the wear of pin connections is yet to be developed. In this paper, acoustic emission (AE)-based parametric analysis methods, including the logarithm of the cumulative energy (LAE), the logarithm of the slope of cumulative energy (LSCE), the b-value method, the Ib-value method, and the fast Fourier transformation (FFT), were developed to quantify the wear degree of pin connections. The b-value method offers a criterion to quickly judge whether severe wear occurs on a pin connection. To assist the research, an experimental apparatus to accelerate wear test of pin connections was designed and fabricated. The AE sensor, mounted on the test apparatus in a nondestructive manner, is capable of real-time monitoring. The micrographs of the wear of pins, and the surface roughness of pins, verified that the values of the max LAE and the max LSCE became larger as the wear degree of pin connections increased, which means different values of the max LAE and the max LSCE can reflect different wear degree of pin connections. Meanwhile, the results of the micrographs and surface roughness confirmed that the b-value is an effective method to identify severe wear, and the value “1” can be used as a criterion to detect severe damage in different structures. Furthermore, the results of spectrum analysis in the low frequency range showed that the wear frequency was concentrated in the range of 0.01 to 0.02 MHz for the pin connection. This study demonstrated that these methods, developed based on acoustic emission technique, can be utilized in quantifying the wear degree of pin connections in a nondestructive way.

Theoretical and Experimental Study on Homologous Acoustic Emission Signal Recognition Based on Synchrosqueezed Wavelet Transform Coherence

“…Since the approximate range of damage sources can be preliminarily determined, the distributions of sensors are shown in Figure 5, and the detailed information is shown in Figures 4 and 6. According to the authors of [21,67], the preamplifer is type 2/4/6 (Physical Acoustic Corporation), and its gain and threshold are set to 40 dB and 45 dB, respectively.…”

Piezoceramic-Based Damage Monitoring of Concrete Structure for Underwater Blasting

“…Passive detection is based on the response of the sensor embedded in the structure or bonded on its surface without involving the actuation function. Often, piezoelectric sensors are used to directly measure structural acceleration, strain, and acoustic emission [33][34][35]. The active damage-detection technology uses an actuator to induce the stress wave signal, and a sensor to detect the travelling stress signal.…”

Bond-Slip Monitoring of Concrete Structures Using Smart Sensors—A Review

“…If so, root-mean-square-deviation (RMSD) is used to obtain the structural damage [80,81,82]. In an AE method, the stress waves generated from the rapid release of energy from a structure due to damage-related deformation is continuous acquired [83,84]. The acquired AE signals offer rich damage-related information, which can be used to characterize the location, source, and evolution of the damage [85,86,87].…”