Water-Droplet Cooling Process in a Steam-Turbine Bypass Flow

Abstract

This paper presents a study of the numerical simulations of a steam flow and heat transfer behavior when subjected to a cooling water spray in the pipe downstream from a high-pressure turbine bypass valve. The structure of a cooling water spray injected into a steam flow was studied for the purpose of developing a physical model to investigate the dissipation and evaporation processes of the cooling water droplets in a high temperature, high turbulent steam flow passage. Heat transfer rates were calculated for a better understanding of the temperature variations in the entire system. A dispersed two-phase model was incorporated for the particle tracking of the droplets injected into the steam flow and the water evaporation process was observed. Further, this study was continued by installing a perforated plate in the pipe section downstream from the water cooling injections. The results of the calculations are quite reasonable, and show a physically sound state.