Wall heat transfer in shock tubes at long test times

Frazier, Corey; Kassab, Alain J.; Petersen, Eric L.

doi:10.1007/978-3-540-85168-4_30

Cited by 2 publications

(1 citation statement)

References 9 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…However, our shock-tube model was developed for a wide range of test time conditions, and when the test times are relatively long, the isothermal assumption is invalid and heat losses from the hot gas to the cold wall become important. The impact of the different thermal boundary conditions on the shock-tube temperature fields was investigated in the study of Frazier et al (2007).…”

Section: Bifurcation Impact On Temperature Fieldsmentioning

confidence: 99%

A conjugate axisymmetric model of a high-pressure shock-tube facility

Lamnaouer

Kassab

Divo

et al. 2014

International Journal of Numerical Methods for Heat &Amp; Fluid Flow

View full text Add to dashboard Cite

Purpose -An axisymmetric shock-tube model of the high-pressure shock-tube facility at the Texas A&M University has been developed. The shock tube is non-conventional with a non-uniform cross-section and features a driver section with a smaller diameter than the driven section. The paper aims to discuss these issues. Design/methodology/approach -Computations were carried out based on the finite volume approach and the AUSM þ flux-differencing scheme. The adaptive mesh refinement algorithm was applied to the time-dependent flow fields to accurately capture and resolve the shock and contact discontinuities as well as the very fine scales associated with the viscous effects. The incorporation of a conjugate heat transfer model enhanced the credibility of the results. Findings -The shock-tube model is validated with simulation of the bifurcation phenomenon and with experimental data. The model is shown to be capable of accurately simulating the shock and expansion wave propagations and reflections as well as the flow non-uniformities behind the reflected shock wave as a result of reflected shock/boundary layer interaction or bifurcation. The pressure profiles behind the reflected shock wave agree with the experimental results. Originality/value -This paper presents one of the first studies to model the entire flow field history of a non-uniform diameter shock tube with a conjugate heat transfer model beginning from the bursting of the diaphragm while simultaneously resolving the fine features of the reflected shock-boundary layer interaction and the post-shock region near the end-wall, at conditions useful for chemical kinetics experiments. An important discovery from this study is the possible existence of hot spots in the end-wall region that could lead to early non-homogeneous ignition events. More experimental and numerical work is needed to quantify the hot spots.

show abstract

Section: Bifurcation Impact On Temperature Fieldsmentioning

confidence: 99%