Voltammetric Determination of Isoniazid in the Presence of Acetaminophen Utilizing MoS2-Nanosheet-Modified Screen-Printed Electrode

Abstract

We used MoS2 nanosheets (MoS2 NSs) for surface modification of screen-printed electrode (MoS2NSs-SPE) aimed at detecting isoniazid (INZ) in the presence of acetaminophen (AC). According to analysis, an impressive catalytic performance was found for INZ and AC electro-oxidation, resulting in an appreciable peak resolution (~320 mV) for both analytes. Chronoamperometry, differential pulse voltammetry (DPV), linear sweep voltammogram (LSV), and cyclic voltammetry (CV) were employed to characterize the electrochemical behaviors of the modified electrode for the INZ detection. Under the optimal circumstances, there was a linear relationship between the peak current of oxidation and the various levels of INZ (0.035–390.0 µM), with a narrow limit of detection (10.0 nM). The applicability of the as-developed sensor was confirmed by determining the INZ and AC in tablets and urine specimens, with acceptable recoveries.

Electrochemical strategies for detection of Diazinon: A review

“…The most common electrochemical system used for laboratory study is made up of a reference electrode, counter electrode, and a working electrode (sensing electrode) immersed in an electrolyte which measures the potential and current generated from oxidative or reductive reactions. The working principle behind electrochemical sensors involves the generation of electrical signals from the analyte of interest, which is affected by the concentration of the analyte [108][109][110][111][112].…”

Flower-like MoS2 screen-printed electrode based sensor for the sensitive detection of sunset yellow FCF in food samples

“…Sunset yellow and other chemicals used were of analytical grade and were purchased from Merck. Flower-like MoS2 was synthesized in our laboratory [72]. A typical SEM is shown in Figure 1.…”

Electrochemical detection of folic acid using a modified screen printed electrode

“…These methods are time-consuming, expensive and require complicated pre-treatment steps. On the other hand, the electrochemical methods are a very promising way for the determination of folic acid and other compounds due to easy fabrication, low cost and rapid analysis compared to other analytical methods [15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30].…”