Virtual Sensors for Estimating District Heating Energy Consumption under Sensor Absences in a Residential Building

Abstract

District heating (DH) is an energy efficient building heating system that entails low primary energy consumption and reduced environmental impact. The estimation of the required heating load provides information for operators to control district heating systems (DHSs) efficiently. It also yields historical datasets for intelligent management applications. Based on the existing virtual sensor capabilities to estimate physical variables, performance, etc., and to detect the anomaly detection in building energy systems, this paper proposes a virtual sensor-based method for the estimation of DH energy consumption in a residential building. Practical issues, including sensor absences and limited datasets corresponding to actual buildings, were also analyzed to improve the applicability of virtual sensors in a building. According to certain virtual sensor development processes, model-driven, data-driven, and grey-box virtual sensors were developed and compared in a case study. The grey-box virtual sensor surpassed the capabilities of the other virtual sensors, particularly for operation patterns corresponding to low heating, which were different from those in the training dataset; notably, a 16% improvement was observed in the accuracy exhibited by the grey-box virtual sensor, as compared to that of the data-driven virtual sensor. The former sensor accounted for a significantly wider DHS operation range by overcoming training data dependency when estimating the actual DH energy consumption. Finally, the proposed virtual sensors can be applied for continuous commissioning, monitoring, and fault detection in the building, since they are developed based on the DH variables at the demand side.

Virtual In Situ Calibration for Operational Backup Virtual Sensors in Building Energy Systems

“…For example, Ploennings et al [12] developed modeldriven virtual observation sensors that bring the metered building-level heat consumption down to room-level ones, based on the concept of relative heating coefficients regarding room size, valve number, heating system size, and design size. Yoon et al [13] produced a model-driven virtual observation sensor for observing/estimating district heating energy consumption under sensor absences in residential buildings. However, the backup virtual sensor works as the counterpart of a target physical sensor.…”

Virtual Sensoring of Motion Using Pontryagin’s Treatment of Hamiltonian Systems

“…The key difference between the usage of first principals presented here follows. Classical methods impose the form of the estimation and control (typically negative feedback with gains) and they have very recently been applied to railway vehicles [ 21 ], biomechanical applications [ 22 ], and remotely operated undersea vehicles [ 23 ], electrical vehicles [ 24 ], and even residential heating energy consumption [ 25 ] and multiple access channel usage by wireless sensor networks [ 26 ]. Deterministic artificial intelligence uses first principals and optimization for all quantities but asserts a desired trajectory.…”

Energy Consumption Analysis and Comprehensive Energy Efficiency Evaluation of Campus Central Heating System Based on Heat Supply Monitoring Platform

“…Therefore, the energy conservation of campus buildings is the most direct and effective means to promote the sustainable development of colleges and universities [6,7]. In recent years, the Internet of Things (IoT) is developing rapidly, building an IoT-based campus heat supply monitoring platform can effectively improve the controllability and management efficiency of heat supply on campus, thereby realizing the goal of reasonable and efficient use of energy [8][9][10].…”