Vibration Response and Stress Analysis of Planar Elastic Tube Bundle Induced by Fluid Flow

Abstract

Flow-induced vibration plays a positive role on heat transfer enhancement. Meanwhile, it is also a negative factor for fatigue strength. Satisfying the fatigue strength is the primary prerequisite for heat transfer enhancement. This paper numerically studied the flow-induced vibration of planar elastic tube bundle based on a two-way fluid-structure interaction (FSI) calculation. The numerical calculation involved the unsteady, three-dimensional incompressible governing equations solved with finite volume approach and the dynamic balance equation of planar elastic tube bundle solved with finite element method combined with dynamic mesh scheme. The numerical approach was verified by comparing with the published experimental results. Then the vibration trajectory, deformation and stress contour of planar elastic tube bundle were all studied. Results show that the combined movement of planar elastic tube bundle represents the agitation from inside to outside. The vibration of out-of-plane is the main vibration form with the typically sinusoidal behavior because the magnitude of displacement along the out-of-plane direction is the 100 times than the value of in-plane direction. The dangerous point locates in the innermost tube where the equivalent stress can be utilized to study the multiaxial fatigue of planar elastic tube bundle due to the alternating stress concentration. In the velocity range of 0.2-3 m/s, it is inferred that the vibration amplitude plays a role on the stress response and the stress amplitude is susceptible to the fluid velocity. This research paves a way for studying the fatigue strength of planar elastic tube bundle by flow-induced vibration.

Research on Vibration and Heat Transfer in Heat Exchanger with Vortex Generator

“…T HE function of the heat exchangers (HEs) [1][2][3] is to exchange the heat between fluid media at various temperatures, and they are widely used in chemical, petroleum, aviation, and other fields. Based on the traditional HE, the elastic coil pipe heat exchanger (ECPHE) [4,5] was developed by using the elastic pipes instead of the rigid pipes. However, unlike the traditional HE, the ECPHE is not devoted to the prevention of vibrations; it can enhance the heat transfer by flow-induced vibrations [6][7][8].…”

“…4 15 mm, d 5 d 6 10 mm, r 50 mm, θ 45 deg, and η 60 deg. In addition, the oblique length of vortex element cross section is 2 mm.…”