Vibration pressing of shaped refractory products

Abstract

In the refractories industry, increasing use is now being made of a method of compacting the material on vibropercussive tables under a dynamic pressure of 1.5-2.0 MPa.An investigation of the process of vibropressing of shaped chamotte products revealed that to obtain a compact material it is necessary to exert a strong dynamic action (about I0 MPa or more). With this aim, at the All-Union Institute of Refractories (VIO) we have developed a method of vibropressing with a powerful dynamic action in a hydroinertial vibropercussive press [i]. A previous report [2] dealt with work on vibropressing of ladle parts of relatively simple shape.In this article we shall give the results of investigations of vibropressingof shaped refractory products made from semidry pastes of various degree of plasticity.In our investigation we used chamotte paste made at the Borovichi Refractories Combine and the Chasov-Yar Combine of Refractory Products, ready-mixed Dinas mixture made at the Krasnogorovka Refractories Works, and also a graphite--chamotte mixture made at the VIO.The graphite--chamotte and Chasov-Yar chamotte pastes were made in a blade-type mixer, which was also used to process the Dinas paste to break up lumps formed during transportation.The Borovichi chamotte paste was made in SM-21A edge runner mills.The specimens were pressed and their characteristics determined by a previously developed method [2]. The power parameters of the process were registered with the aid of tensometers and an N-105 oscillograph.All-Union Institute of Refractories.

Basic parameters in vibropressing large dinas quartzite cement blocks

“…3) and p (Fig. 4) with the third factor stabilized at the lower level -i and the upper level +i by corresponding transformation of (i) and (2) and (i) (2) , ' …”

“…The following regression equations were fitted: Only three of the four factors influence ozz 0 and 9, since X z had an insignificant effect (within 10-12%) on the dried strength in (I), while X4 was not significant within 20-33% limits for the density in (2).…”