Vibration analysis and control of cracked beam using finite element method by using ANSYS

Abstract

Purpose The purpose of this paper is to develop an organized structure for damage detection of a cracked cantilever beam using finite element method and experimental method technique. Design/methodology/approach Due to presence of cracks the dynamic characteristics of structure change. The change in dynamic behavior has been used as one of the criteria of fault diagnosis for structures. Major characteristics of the structure which undergo change due to presence of crack are: natural frequencies, the amplitude responses due to vibration and the mode shapes. Therefore, an attempt has been made to formulate a smart technique for minimizing the amplitude of vibration for crack cantilever beam structures. In the analysis both single and double cracks are taken into account. Findings The results of the active vibration control experiments proved that piezoelectric sensor/actuator pair is an effective sensor and actuator configuration for active vibration control to reduce the amplitude of vibration for closed-loop system. Originality/value It is necessary that structures must safely work during its service life, but damages initiate a breakdown period on the structures which directly affect the industrial growth. It is a recognized fact that dynamic behavior of structures changes due to presence of crack. It has been observed that the presence of cracks in structures or in machine members leads to operational problem as well as premature failure.

Effect of Thermal Response and Vibration on the Multicracked Rotor Immersed in a Fluid Medium Using Finite Element Method

“…Liu et al [35] have suggested the finite element method to analyze damaged rotor shafts for the control of crack propagation. Toke and Patil [36] have proposed the finite element method and experimental method technique to identify and control the open crack in the beam.…”