Value-Added Utilization of Agro-Waste Derived Oil Palm Ash in Epoxy Composites

Abstract

Oil palm ash (OPA) is an agro-industry waste and it has disposable problems. In the present study, an effort was made for value addition to OPA by incorporating it as a micro-filler in different concentration (0, 10, 20, 30, 40, and 50%) and sizes (100, 200, and 300 mesh size particles) in the epoxy matrix. Prepared micro OPA was having a crystallinity index of 65.4%, high inorganic elements, and smooth surface morphology. Fabricated composites had higher void content as compared to neat epoxy matrix. Mechanical properties of fabricated composites had a maximum value at 30% loading of 300 mesh-size filler due to its low void content and size as compared to filler of 100 and 200 mesh size. Further increase in the concentration of OPA filler after 30 wt% of loading leads to the agglomeration of OPA microparticles and thereby resulted in the reduction of mechanical characteristics such as tensile strength, tensile modulus, flexural strength and flexural modulus of the composites. However, elongation at break decreased with increase in filler content at all percentage. Thermal stability and char residue percentage of composite increased with the concentration of filler at all percentage. Surface morphology of composite showed that OPA incorporation lead towards its roughness and cracks were originated from the site of OPA embedded in the epoxy matrix. The 300 meshsize particles were having the best effect on composite as compared to 100 and 200 mesh-size filler.

Hydrophobicity and mechanical properties of purified lignin nanoparticles reinforced marine‐derived biopolymer composites

“…It is also essential to note that the average size of both PLNP and ULNP can be classified as nanoparticles as they were below 100 nm. 31,32 This nanosize can enhance the interlocking between LNPs and the matrix since the nanomaterial is able to be dispersed uniformly in the matrix and has a high reinforcing potential. As a result, this will contribute to remarkable final properties improvement of the biopolymer composite materials.…”

Effect of giving viterna plus supplements at different doses in feed on growth, survival rate, and feed conversion ratio of milkfish (Chanos chanos) seeds

“…Penambahan suplemen viterna plus pada udang windu (Akmal et al, 2020), ikan patin (Aprilia et al, 2018), ikan lele sangkuriang (Hendrasaputro et al, 2015) berpengaruh terhadap laju pertumbuhannya dengan perlakuan terbaik pada dosis 15 mL/kg pakan. Penambahan suplemen viterna plus pada ikan jelawat (Susilo et al, 2022) Penambahan 100 mL aquadest untuk pengenceran agar viterna tidak terlalu pekat (Susilo et al, 2022).…”

Faktor-Faktor Yang Mempengaruhi Kinerja Karyawan (Studi Kasus Dalam Divisi Finance Dan Accounting Pt. Mulia Cemerlang Abadi Multi Industry)

“…Pada penelitian Arianto (2013) lingkungan kerja, pemberian kompensasi dan pelatihan memengaruhi kinerja karyawan. Namun besaran kompensasi tidak selalu dapat meningkatkan kinerja karyawan (Rizal, Idrus, & Mintarti, 2014).…”