Valorization of bamboo wastes for the production of particleboards

Furtini, Ana Carolina Corrêa; Santos, Carla A.; Faria, Douglas Lamounier; Vecchia, A.P.L.; Fernandes, I.C.; Mendes, Lourival Marin; Júnior, José Benedito Guimarães

doi:10.1201/9780429289798-32

Cited by 1 publication

(2 citation statements)

References 0 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…It was found that the moisture content of the pine panels showed higher values than the other panels, both 100 % pine and in different mixtures. This result was attributed to the chemical composition of the lignocellulosic materials of the other types of particles being similar to that of hardwoods, which contain lower lignin content and higher hemicellulose content (Frollini et al 2000, Furtini et al 2019.…”

Section: Physical and Mechanical Propertiesmentioning

confidence: 99%

“…The low performance of the panels produced with 100 % mate is due to the rounded shape of its particles (short and wide), resulting in lower bending values (Cosereanu et al 2015, Benthien et al 2019. The 100 % bamboo panels presented weak contact between their particles (TS), due they are being a less polar material (compared to wood), with higher pH and higher extractive content, promoting low retention of adhesive in the particles, justifying the MOR lower value (Soares et al 2017, Furtini et al 2019. The panels produced with bamboo and mate mixture, reached higher average value than 15 MPa of the standard EN 312 (2010).…”

Section: Physical and Mechanical Propertiesmentioning

confidence: 99%

See 1 more Smart Citation

Particleboard experimental production with bamboo, pine and mate for one product of new applications

Rusch

Hillig

Mustefaga

et al. 2023

Maderas, Cienc. tecnol.

View full text Add to dashboard Cite

Particleboard can be produced from a mixture of different lignocellulosic materials, which can be chosen depending on the density required for the panel and its applications. The aim of this study was to evaluate the mechanical properties of particleboard with bamboo, pine and mate for a new product of high density for the special applications currently served by HDF. Particles of bamboo (Phyllostachys aurea) finely chopped sticks of mate (Ilex paraguariensis) and commercial particles of southern pine (Pinus taeda) wood were used. These particles used 100 % by weight in the panel or in mixtures of 50 % each (three mixtures) or in a triple mixture of one third each, were glued in a drum-type rotary mixer with melamine-urea-formaldehyde (MUF) resin,

show abstract

Section: Physical and Mechanical Propertiesmentioning

confidence: 99%