Using FAHP Methods Evaluation and Screening of Intellectual Property Rights Managers in Taiwan

In China, the non-exploitation of bioenergy poses major problems and challenges. To solve bioenergy problems, considerable efforts have been made to expedite the construction of large-scale crop residue utilization projects. In this study, three principal supported modes of large-scale crop residue utilization projects were taken as empirical cases in Hubei province bioenergy planning. In terms of the overall benefit and sustainable development, a third-grade evaluation index system was established. The analysis was carried out using the analytical hierarchy process, principal component projection, and grey relational analysis. The conclusion indicates that according to the evaluation values, the sequence from best to worst was crop residue biogas project, crop residue briquette fuel project, and crop residue gasification project. Nevertheless, there was no remarkable difference in the overall evaluation values. The biogas project had certain advantages in terms of the production cost, soil improvement, and expenditure saving, whereas the gasification project was comparatively insufficient in environmental efficiency, product benefit, by-product disposal, and technical rationality. According to actual evaluation results, the unilateral determination approach of the single weight index can be seen as being overcome through the unified adaptation of the evaluation methods. The research results can serve as a reference for making investment decisions to build large-scale crop residue utilization projects.

show abstract

“…, w n ] [88]. (3) For the consistency check, calculate the consistency index (CI) [83,89] by applying Equation 3:…”

Section: Principles Of the Ahpmentioning

confidence: 99%

Techno-Economic Assessment of Three Modes of Large-Scale Crop Residue Utilization Projects in China

Meng

Alengebawy

et al. 2020

Energies

View full text Add to dashboard Cite

show abstract

“…The redundant information may serve for detecting inaccuracies and possible errors in the expressed preferences. If the judgment matrix is fully consistent, we can find weights that satisfy each equation (7) as equality. The matrix is consistent if ( / )( / ) = ( / ) for each i, j, k. In practice, the matrix may contain some level of inconsistency.…”

Section: Solving the Weights The Complementary Judgementmentioning

confidence: 99%

“…Such an interpretation is different from our assumption that are related to trade-off ratios. Fuzzy techniques have been applied also with the AHP method [6][7][8][9][10][11].…”

Section: Introductionmentioning

confidence: 99%

Complementary Judgment Matrix Method with Imprecise Information for Multicriteria Decision-Making

Wang

Lahdelma

Salminen

2018

Mathematical Problems in Engineering

View full text Add to dashboard Cite

The complementary judgment matrix (CJM) method is an MCDA (multicriteria decision aiding) method based on pairwise comparisons. As in AHP, the decision-maker (DM) can specify his/her preferences using pairwise comparisons, both between different criteria and between different alternatives with respect to each criterion. The DM specifies his/her preferences by allocating two nonnegative comparison values so that their sum is 1. We measure and pinpoint possible inconsistency by inconsistency errors. We also compare the consistency of CJM and AHP trough simulation. Because preference judgments are always more or less imprecise or uncertain, we introduce a way to represent the uncertainty through stochastic distributions, and a computational method to treat the uncertainty. As in Stochastic Multicriteria Acceptability Analysis (SMAA), we consider different uncertainty levels: precise comparisons, imprecise comparisons with a stochastic distribution, and missing comparisons between criteria. We compute rank acceptability indices for the alternatives, describing the probability of an alternative to obtain a given rank considering the level of uncertainty and study the influence of the uncertainty on the SMAA-CJM results.

show abstract

“…Zejli K. et al [18] proposed FAHP to build a framework for modelling the problem selection of locating logistics platforms in emergency affected area, Lashgari Z. and Safari K. [19] used FAHP approach to determine the factors affecting the selection of both the volume and type of invested securities. Wang M. and Hwang K. [20] used FAHP approach to analyse the key factors involved in evaluating and screening industry managers. Wang J. and Li Y.…”

Section: Previous Workmentioning

confidence: 99%

An Integrated Risk Assessment Approach andApplication to Dynamic PositioningSystem

Marhany

2015

Port-Said Engineering Research Journal

View full text Add to dashboard Cite

Science many of ships accidents are the results of loss position, Dynamic Positioning (DP) system is fixed in different types of vessels to maintain its position.However there are potential hazards in DP system which need an effective risk assessment approach to deal with. In this endeavour integration two Multi Criteria Decision Making (MCDM) approaches, namely; qualitative and Fuzzy Analytic Hierarchy Process (FAHP), is proposed to overcome the shortcomings and maximize the advantages of each approach. The structure of this integrated approach is clarified then 15 potential hazard scenarios in DP system are selected as a case study where the proposed integration risk assessment approach is used to rank these scenarios in respect to eight criteria namely Frequency, Human safety, Environment, Finance and Cost, ship safety and technology, Reputation, Detectability and reduction measures. A huge amount of computer output are obtained but for space limitation only the final results are illustrated in different forms and thoroughly analysis is carried out and the rank levels forall scenarios are obtained.

show abstract

Using FAHP Methods Evaluation and Screening of Intellectual Property Rights Managers in Taiwan

Cited by 8 publications

References 9 publications

Techno-Economic Assessment of Three Modes of Large-Scale Crop Residue Utilization Projects in China

Techno-Economic Assessment of Three Modes of Large-Scale Crop Residue Utilization Projects in China

Complementary Judgment Matrix Method with Imprecise Information for Multicriteria Decision-Making

An Integrated Risk Assessment Approach andApplication to Dynamic PositioningSystem

Contact Info

Product

Resources

About