Use of Compression Molding for the Production of Ternary Films Based on Poly (Lactic Acid), Montmorillonite, and Oregano Essential Oil

Abstract

Poly (Lactic Acid) (PLA) is considered one of the most promising polymers. However, neat PLA films have limitations. An effective strategy to overcome these problems is incorporating clay or essential oils. Cloisite 30B (C30B) is an organoclay widely used to improve the properties of polymers. Notably, the development of films incorporating Oregano Essential Oil (OEO) has attracted significant attention. Compression molding manufactured neat PLA, PLA/C30B, and PLA/C30B/OEO films in this manuscript. The visual evaluation indicated that the films had a good surface finish, and the films thickness varied between 0.15–0.19 mm. The moisture content increased with the incorporation of C30B and OEO. Optical microscopy showed a good distribution of clay particles. The transparency of the films increased with OEO, while with C30B, it presented greater opacity. Incorporating C30B/OEO in the PLA matrix is a promising film proposal that can be directed to the packaging sector. However, other analyses must be done better to understand the films performance for such an application.