Unlocking By-Passed Oil with Autonomous Inflow Control Devices Through an Integrated Approach

Abstract

In a giant offshore UAE carbonate oil field, challenges related to advanced maturity, presence of a huge gas-cap and reservoir heterogeneities have impacted production performance. More than 30% of oil producers are closed due to gas front advance and this percentage is increasing with time. The viability of future developments is highly impacted by lower completion design and ways to limit gas breakthrough. Autonomous inflow-control devices (AICD's) are seen as a viable lower completion method to mitigate gas production while allowing oil production, but their effect on pressure drawdown must be carefully accounted for, in a context of particularly high export pressure. A first AICD completion was tested in 2020, after a careful selection amongst high-GOR wells and a diagnosis of underlying gas production mechanisms. The selected pilot is an open-hole horizontal drain closed due to high GOR. Its production profile was investigated through a baseline production log. Several AICD designs were simulated using a nodal analysis model to account for the export pressure. Reservoir simulation was used to evaluate the long-term performance of short-listed scenarios. The integrated process involved all disciplines, from geology, reservoir engineering, petrophysics, to petroleum and completion engineering. In the finally selected design, only the high-permeability heel part of the horizontal drain was covered by AICDs, whereas the rest was completed with pre-perforated liner intervals, separated with swell packers. It was considered that a balance between gas isolation and pressure draw-down reduction had to be found to ensure production viability for such pilot evaluation. Subsequent to the re-completion, the well could be produced at low GOR, and a second production log confirmed the effectiveness of AICDs in isolating free gas production, while enhancing healthy oil production from the deeper part of the drain. Continuous production monitoring, and other flow profile surveys, will complete the evaluation of AICD effectiveness and its adaptability to evolving pressure and fluid distribution within the reservoir. Several lessons will be learnt from this first AICD pilot, particularly related to the criticality of fully integrated subsurface understanding, evaluation, and completion design studies. The use of AICD technology appears promising for retrofit solutions in high-GOR inactive strings, prolonging well life and increasing reserves. Regarding newly drilled wells, dedicated efforts are underway to associate this technology with enhanced reservoir evaluation methods, allowing to directly design the lower completion based on diagnosed reservoir heterogeneities. Reduced export pressure and artificial lift will feature in future field development phases, and offer the flexibility to extend the use of AICD's. The current technology evaluation phases are however crucial in the definition of such technology deployments and the confirmation of their long-term viability.

Completion Strategy for Water Control in Horizontal Wells of an Indian Western Offshore Oilfield: A Case Study

“…AICD Range 1 Fluidic Diode (0.3-1.5 cP) produces light oil and identifies fluid differences. comparing light oil and water viscosity AICD Range 1 Fluidic Diodes inhibit water flow and increase oil production [20]. AICD is most effective for permeability variations between 0.1 mD and 500 mD.…”

Completion Strategy: A Case Study of Using Autonomous Inflow Control Technology to Manage Water

“…The AICD (0.3-1.5 cP) Range 1 Fluidic Diode type excels for making light oil and identifying the minute differences between fluids. If the tiny difference in viscosity between light oil and water can be determined [57], then AICDs of the Range 1 Fluidic Diode type can be utilized to restrict water flow and boost oil output. AICD's ability to stabilize input is especially helpful in regions where permeability fluctuates significantly (more than 0.1 mD but less than 500 mD).…”