Unique Oil-in-Brine Pickering Emulsion Using Responsive Antipolyelectrolyte Functionalized Latex: A Versatile Emulsion Stabilizer

Abstract

A simple and straightforward approach to synthesize oil-in-water (O/W) emulsions under high salinity and temperature using zwitterion-functionalized latexes are presented in this work. First, well-defined functionalized latexes were synthesized by emulsifier-free emulsion copolymerization in the presence of precursor sulfobetaine comonomer using brine as a continuous phase. The surface-functionalized latex particles were then characterized by DLS, SEM, TEM, XPS, and TGA. The functionalized latex exhibited antipolyelectrolyte behavior in high salinity brine and at high temperatures. The effects of salinity, temperature, and pH on the long-term stability of the particles were investigated. Further, to evaluate the potential in high salinity brine and high temperature, the saltphilic functionalized latexes were utilized to stabilize the oil/brine (O/W) interface without any other additives. The latex enabled the formation of a stable Pickering emulsion system with low solid content (<0.02% w/w) in the presence of 50% v/v n-decane. The functionalized latexes were self-assembled at the O/W interface as a spherical colloidosome in high salinity brine through hydrophobic interactions and irreversible adsorption. The supraparticles were imaged with SEM, providing an insight that the exterior of the emulsion droplets is stabilized by the saltphilic latex particles, forming a protective layer at the oil−water interface through electrostatic repulsion. The antipolyelectrolyte latex can be utilized as a novel emulsion stabilizer, which can provide a versatile alternative for applications in a complex environment such as high salinity, temperature, and low or high pH.

Biosourced Polymeric Emulsifiers for Miniemulsion Copolymerization of Myrcene and Styrene: Toward Biobased Waterborne Latex as Pickering Emulsion Stabilizer

“…It is therefore of great interest to develop biobased waterborne latexes synthesized by an eco-friendly process as stabilizers of Pickering emulsion. Indeed, polymer latex particles − or block copolymer latex particles synthesized by emulsion polymerization have also been proven to be efficient colloidal particles to stabilize emulsions.…”

Fine-Tuning the Surface and Interfacial Chemistry of Silica Nanoparticles to Control Stability in High Ionic Strength Electrolytes and Modulate Assembly at Oil–Water Interfaces

“…One of the challenges of using NPs in practical applications is their colloidal stability, especially in high salinity and high charge electrolytes. With increasing ion concentration, the surface charge on the particles is screened resulting in aggregation and sedimentation. ,, In the following section, we focus on the stability of NPs in a complex brine containing a mixture of salts (701, 22, 185, 44, and 1.6 mM NaCl, CaCl 2 , MgCl 2 Na 2 SO 4 , and NaHCO 3 , respectively) and different temperatures (up to 60 °C) under accelerated test conditions. We start with suspensions of S 1,2 (1 wt %) subjected to 500 × g⃗ at different temperatures for 500 s. We quantify the stability by the separation indices at different temperatures, calculated from the transmission profiles (Figure a).…”

Critical Review on Synthetic Routes and Catalytic Applications of Hollow Nanomaterials

“…poly-ethylene terephthalate water could evaporate at ambient temperature from hollow nanocapsules to form tubular assemblies. [106] Formation of carbon hollow shell structure:…”