Understanding the Giant Gap between Single‐Pore‐ and Membrane‐Based Nanofluidic Osmotic Power Generators

Abstract

Nanofluidic blue energy harvesting attracts great interest due to its high power density and easy‐to‐implement nature. Proof‐of‐concept studies on single‐pore platforms show that the power density approaches up to 103 to 106 W m–2. However, to translate the estimated high power density into real high power becomes a challenge in membrane‐scale applications. The actual power density from existing membrane materials is merely several watts per square meter. Understanding the origin and thereby bridging the giant gap between the single‐pore demonstration and the membrane‐scale application is therefore highly demanded. In this work, an intuitive resistance paradigm is adopted to show that this giant gap originates from the different ion transport property in porous membrane, which is dominated by both the constant reservoir resistance and the reservoir/nanopore interfacial resistance. In this case, the generated electric power becomes saturated despite the increasing pore number. The theoretical predictions are further compared with existing experimental results in literature. For both single nanopore and multipore membrane, the simulation results excellently cover the range of the experimental results. Importantly, by suppressing the reservoir and interfacial resistances, kW m–2 to MW m–2 power density can be achieved with multipore membranes, approaching the level of a single‐pore system.

Electric‐Field‐Induced Ionic Sieving at Planar Graphene Oxide Heterojunctions for Miniaturized Water Desalination

“…Finite‐element method was employed to solve the model with appropriate boundary conditions, following an established process. [ 56–59 ] The model channel was 2 nm high and 1 µm long. For heterogeneous nanochannels, the negatively charged (n‐part, 400 nm long, −60 mC m −2 ) and positively charged parts (p‐part, 400 nm long, 60 mC m −2 ) were connected by a 200‐nm long transition zone.…”

Improved osmotic energy conversion in heterogeneous membrane boosted by three-dimensional hydrogel interface

“…It is experimentally challenging to scale up the heterogeneous membrane, which can be ascribed to the combined effect of multiple factors such as enhanced entering resistance (i.e., the sum of reservoir resistance and reservoir/ nanopores interfacial resistance), hindered counter-ion diffusion (caused by relatively low selectivity), and increased stochastic defects. Normalizing this high power density into real high power for industrial large-scale membrane applications is a necessity, which needs the joint efforts of both experimental and theoretical scientists in the future 60,61 . 1.…”

Oppositely Charged Ti3C2Tx MXene Membranes with 2D Nanofluidic Channels for Osmotic Energy Harvesting

“…This phenomenon can be ascribed to the decreased range of the overlapped EDLs in large channels, leading to a reduced local concentration gradient . This means, the nano‐sized pores may help to reduce the influence of the transportation of counter‐ion into the channel, thus enhance the osmotic transport ability . Moreover, a tandem of MXM‐RED stacks was constructed to obtain higher voltages.…”