Understanding hydrogen jet dynamics for direct injection hydrogen engines

Abstract

The energy paradigm is shifting toward carbon-free and low-emission alternative fuels. Among the many candidates, hydrogen is considered a promising option thanks to its favorable fuel properties, including zero carbon content, high gravimetric energy density, and fast flame speed, despite its technical fuel production and storage challenges. Direct injection technology has been identified as the best approach for applying hydrogen in combustion engines to overcome the accompanying issues, such as backfire and low energy density. However, studies have yet to be conducted on hydrogen jet behavior in direct injection systems, specifically, studies that elucidate engine design and injection parameter optimization in the combustion system. Therefore, we aimed to assess hydrogen jet behavior through experiments and computational approaches comprehensively. Hydrogen was injected at 10 MPa using the direct injection method into a constant volume chamber under a quasi-steady ambient condition. Z-type high-speed Schlieren imaging was performed using a high-speed camera to visualize the hydrogen jet structure, which depicted the hydrogen jet’s vapor intermittency and vortex structure. We also performed a computational fluid dynamics (CFD) simulation to understand the aerodynamics of the jet. The results showed the formation of vortical flow in the inner core region, where the pressure was comparatively lower than that on the outer side of the jet. Our further investigation of the injection strategy showed that multiple injections were more beneficial in forming a favorable hydrogen-air mixture near the spark plug than a single injection case.

Spray Characterization of Direct Hydrogen Injection as a Green Fuel with Lower Emissions

“…For the design and optimization of hydrogen direct injection systems, it is essential to study the behavior of the hydrogen jet in the cylinder as well as the influence of the operating parameters and boundary conditions [20]. For this purpose, suitable visualization techniques are required to obtain information on the shape, penetration, angle, density, and velocity of the jet.…”