Ultrasonic Nondestructive Testing for In-Line Monitoring of Wire-Arc Additive Manufacturing (WAAM)

Abstract

The applications for metal additive manufacturing (AM) are expanding. Powder-bed, powder-fed, and wire-fed AM are the different kinds of AM technologies based on the feeding material. Wire-Arc AM (WAAM) is a wire-fed technique that has the potential to fabricate large-scale three-dimensional objects. In WAAM, a metallic wire is continuously fed to the deposition location and is melted by an arc-welding power source. As the applications for WAAM expands, the quality assurance of the parts becomes a major concern. Nondestructive testing (NDT) of AM parts is necessary for quality assurance and inspection of these materials. The conventional method of inspection is to perform testing on the finished parts. There are several limitations encountered when using conventional methods of NDT for as-built AM parts due to surface conditions and complex structure. In-situ process monitoring based on the ultrasound technology is proposed for WAAM material inspection during the manufacturing process. Ultrasonic inline monitoring techniques have the advantages of providing valuable information about the process and parts quality. Ultrasonic technique was used to detect the process condition deviations from the normal. A fixture developed by the authors holds an ultrasonic sensor under the build platform and aligned with the center of the base plate. Ultrasonic signals were measured for different process conditions by varying the current and gas flow rate. Features (indicators) from the radio frequency (RF) signal were used to evaluate the difference in signal clusters to identify and classify different build conditions. Results show that the indicator values of the ultrasonic signals in the region of interest (ROI) changes with different process conditions and can be used to classify them.

Forming accuracy improvement in wire arc additive manufacturing (WAAM): a review

“…Once this characteristic signal is identified by the manufacturing system, a closed-loop real-time control strategy (Chabot et al, 2021;Surovi et al, 2021) is used to adjust the arc length to avoid geometric defects in the deposited component (Zhu et al, 2019). Hossain et al proposed a new online monitoring method (Hossain et al, 2021), wherein ultrasonic sensors were fixed under a substrate to obtain current and gas flow data. The online monitoring system was developed based on electrical, optical and thermal data obtained using a multi-sensor system (Reisch et al, 2020;Xu et al, 2018;Pringle et al, 2020).…”

“…Hossain et al proposed a new online monitoring method (Hossain et al , 2021), wherein ultrasonic sensors were fixed under a substrate to obtain current and gas flow data. The online monitoring system was developed based on electrical, optical and thermal data obtained using a multi-sensor system (Reisch et al , 2020; Xu et al , 2018; Pringle et al , 2020).…”