Two‐Ray Reflection Resolution Algorithm for Planar Material Electromagnetic Property Measurement at the Millimeter‐Wave Bands

Abstract

Electromagnetic (EM) reflection properties of building materials and structures have been investigated through practical measurements. However, the finite thickness of measured materials makes it challenging to resolve the rays reflected from the front and the back surfaces. In this paper, we therefore present a three‐step minimum least squares‐based algorithm to resolve two closely adjacent rays reflected from the front and the back surfaces of a board‐shaped material. Our analytical and numerical results show that the proposed algorithm achieves the Cramér‐Rao lower bound. The proposed algorithm is validated using measurement data for various materials and incident angles in the 40–50 GHz frequency band. The validation results show that the proposed algorithm is capable of resolving two closely adjacent rays with a root‐mean‐square deviation that is smaller than 0.08. Main applications of the proposed algorithm can be found in the frequency domain measurements of the EM wave reflections by typical building structures, e.g., window glass, doors, ceiling, and floors.

5G to 6G: A Paradigm Shift in Radio Channel Modeling

“…Moreover, the exact knowledge of our living environment, for example, shapes of trees and leaves, layered wall structures and their dielectric constants is essential to know the attenuation during wave‐object interaction, but it isn't always available or accessible and hence left as a challenge. Therefore, a great deal of work is still needed to characterize the scattering properties of many construction materials for the several mm‐wave and sub‐THz frequencies that are being proposed for beyond‐5G wireless systems (Possenti et al., 2020; Zhang et al., 2020).…”

How Friendly Are Building Materials as Reflectors to Indoor LOS MIMO Communications?

“…To avoid any possible negative impact on the functionality and appearance of a room, a desirable indoor BS deployment is to integrate MIMO antenna arrays with interior walls [15], [16], which however will result in non-negligible coupling between MIMO antenna arrays and building materials [17]- [19]. Specifically, when an EM wave impinges on a wall surface, the intensity of the wall reflected wave can be measured by the reflection coefficient, which depends on the EM and physical properties of the wall material, i.e., its relative permittivity and thickness [20]- [25]. The wall reflected EM waves would be superposed with other EM waves, which may jointly influence the indoor wireless performance.…”