Chemical vapor deposition (CVD) diamond crystal is considered as an ideal material platform for Raman lasers with both high power and good beam quality due to its excellent Raman and thermal characteristics. With the continuous development of CVD diamond crystal growth technology, diamond Raman lasers (DRLs) have shown significant advantages in achieving wavelength expansion with both high beam quality and high-power operation. However, with the output power of DRLs reaching the kilowatt level, the adverse effect of the thermal impact on the beam quality is progressively worsening. Aiming to enunciate the underlying restrictions of the thermal effects for high-power DRLs (e.g., recently reported 1.2 kW), we here establish a thermal-structural coupling model, based on which the influence of the pump power, cavity structure, and crystal size have been systematically studied. The results show that a symmetrical concentric cavity has less thermal impact on the device than an asymmetrical concentric cavity. Under the ideal heat dissipation condition, the highest temperature rise in the diamond crystal is 23.4 K for an output power of ~2.8 kW. The transient simulation further shows that the heating and cooling process of DRLs is almost unaffected by the pump power, and the times to reach a steady state are only 1.5 ms and 2.5 ms, respectively. In addition, it is also found that increasing the curvature radius of the cavity mirror, the length and width of the crystal, or decreasing the thickness of the crystal is beneficial to alleviating the thermal impact of the device. The findings of this work provide some helpful insights into the design of the cavity structure and heat dissipation system of DRLs, which might facilitate their future development towards a higher power.
