Towards Efficiency of Oblique Images Orientation

Abstract

ABSTRACT:Many papers on both theoretical aspects of bundle adjustment of oblique images and new operators for detecting tie points on oblique images have been written. However, only a few achievements presented in the literature were practically implemented in commercial software. In consequence often aerial triangulation is performed either for nadir images obtained simultaneously with oblique photos or bundle adjustment for separate images captured in different directions. The aim of this study was to investigate how the orientation of oblique images can be carried out effectively in commercial software based on the structure from motion technology. The main objective of the research was to evaluate the impact of the orientation strategy on both duration of the process and accuracy of photogrammetric 3D products. Two, very popular software: Pix4D and Agisoft Photoscan were tested and two approaches for image blocks were considered. The first approach based only on oblique images collected in four directions and the second approach included nadir images. In this study, blocks for three test areas were analysed. Oblique images were collected with medium-format cameras in maltan cross configuration with registration of GNSS and INS data. As a reference both check points and digital surface models from airborne laser scanning were used.

Deep Learning for Automatic Building Damage Assessment: Application in Post-Disaster Scenarios Using Uav Data

“…Summarising the obtained results and according to the achieved final products, it is possible to define some essential items that need to be considered to get suitable outputs for the BDA operations. Concerning the image-acquisition phase, it is recognized that, in addition to the nadir acquisitions, the use of oblique images (Aicardi et al, 2016;Duarte et al, 2017;Ezequiel et al, 2014) is crucial and fundamental for improving the 3D reconstruction part (especially in urban areas) and it is also essential during the BBA (bundle block adjustment) since the use of those images allow to increase the rigidity of the photogrammetric block and, consequently, allowing the possibility of decreasing the number of the used GCPs (ground control points) when platforms without RTK/PPK are employed (Nesbit & Hugenholtz, 2019;Ostrowski & Bakuła, 2016).…”