Torsional Behavior of Steel-Concrete-Steel Sandwich Beams with Welded Stirrups as Shear Connectors

Abstract

The structural performance of a steel-concrete-steel sandwich beam (SCSSB) with welded stirrups to the steel skin plates as shear connections exposed to a pure torsion load was studied in this paper. Eight SCSSB specimens were fabricated and tested under pure torsion. The effects of the compressive strength of the concrete core, 26 and 35 MPa, the thickness of the top and bottom steel skin plates, 2 and 4 mm, and the degree of shear interaction, which represents the number of beam stirrups, between the steel skin plates and the concrete core are 75, 100, and 125%. The experiment beams revealed a similar mode of failure for all SCSSB specimens regarding all considered variables, which started with inclined cracks along the specimens’ side faces and ended with local separation between one of the steel skin plates (top or bottom) and the concrete core. In addition, the experiment results showed an increase in the torsional strength with the increase in the shear connection ratio and the thickness of the steel skin plate, as well as with the increase in the strength of the concrete core. However, it was observed that the torsional ductility of the tested beams is proportional directly to the steel skin plate thickness and degree of interaction and inversely with the concrete compressive strength. The results showed that the use of steel skin plates with welded stirrups as a shear connection could reduce the negative effect of increasing the compressive strength of the concrete core on the torsional ductility of SCSSB. Doi: 10.28991/CEJ-2023-09-01-016 Full Text: PDF

Strength Assessment of Stiffened-Panel Structures against Buckling Loads: FE Benchmarking and Analysis

“…The criticality of selecting an appropriate mesh size in the finite element method cannot be overstated, as it plays a vital role in the accuracy and reliability of structural simulations; moreover, the partitioning of this mesh necessitates careful consideration to ensure that the chosen size adequately represents the intricacies of the structure [20][21][22][23]. Extensive scholarly discourse in the realm of structural analysis emphasizes the profound impact of mesh size on simulation outcomes [24,25]. Previous research endeavors have demonstrated that variations in mesh size can yield disparate results, thereby underscoring the need for meticulous attention to this parameter.…”

Carbon Fiber-Reinforced Polymer Composites Integrated Beam–Column Joints with Improved Strength Performance against Seismic Events: Numerical Model Simulation

“…This improvement in the structural integrity becomes more significant than the initial performance. Rehabilitation is the process of reparation and restoration of the performance and strength lost in the structures under varied situations [4][5][6][7]. In the repairing process, the structural members' quality are improved to meet the desired requirements.…”