Topsis Based Optimization of Process Parameters While Hard Turning of Aisi 52100 Steel

Abstract

In the present work optimization of machining parameters is performed by employing Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) while AISI 52100 steel hard turning with polycrystalline cubic boron nitride (PCBN) tools. Based on Central Composite Design (CCD) of Response Surface Method (RSM) experiments are planned and conducted. Experiments were accomplished by varying machining parameters such as cutting speed, feed, depth of cut, nose radius and negative rake angle. In this study surface roughness and workpiece surface temperature are measured during experiment. To determine the influence of cutting parameters, Analysis of variance (ANOVA) was deployed. Optimal turning parameters are cutting speed 200 rpm, feed 0.1 mm/rev, depth of cut 0.7 mm, nose radius 1.2 mm and negative rake angle 45º.

Application of Data Mining-Based Affinity Propagation Clustering Algorithm for Diagnosis of Mechanical Equipment Transmission System

“…For judging whether the working state of the transmission system is normal, collecting data changes is the most direct and effective method. The analysis of the frequency domain signals collected from the helicopter can effectively determine its internal working status, thereby achieving the identification and evaluation of the faults [5]. However, when using big data analysis to deal with failures, it is necessary to judge from multiple angles, which requires redefining the data.…”

Automatic Monitoring System of Energy-Saving Agricultural Production Equipment Using Wireless Sensor Network

“…According to the application characteristics of WSN-APEAM system, when building Sink, MCU + CC2420 is taken on the basis [5] of this report, and the realization idea of sink in WSN-APEAM system is proposed. As shown in Figure 2, the design idea is shown.…”

Method of Mechanical Fault Diagnosis Under Deep Automatic Encoder Under Support Vector Machine

“…At present, the motion control methods of machine tools mainly include PLC control and motion control card control. Considering the flexibility and openness of the processing platform, this paper selects the motion control card to control the machine tool [7][8]. Currently, there are three motion control cards used on numerical control machine tools: PMAC, TRIO, and GALIL.…”