Tight coupling of GPS, laser scanner, and inertial measurements for navigation in urban environments

Abstract

Many applications can be envisioned for accurate, robust, and reliable navigation solution in challenging urban environments. Examples of existing and prospective applications include, but are not limited to, navigation, guidance, and control of autonomous vehicles (including both ground and aerial vehicles) for urban surveillance and reconnaissance; collection of geographical information system (GIS) data in cities; monitoring of urban infrastructure for situational awareness; and, precise automotive applications such as automated lane keeping. If used by themselves, none of the existing navigation technologies have the potential to fully satisfy the requirements for reliable and accurate navigation in urban environments. Hence, this paper develops a multi-sensor integrated solution that combines the complementary features of the Global Positioning System (GPS), laser scanner feature-based navigation, and inertial navigation for urban scenarios.GPS and laser scanner-based navigation ideally complement each other for urban navigation. The laser scanner-based navigation relies on the availability of structures (lines and surfaces) within the scan range (80 m, typically). Features (such as lines) are first extracted from laser scan images and then used for position and attitude determination. In urban areas, if there exists a building wall that blocks GPS signals, this wall creates a feature in the laser scan image. On the other hand, for open streets with limited features, the GPS signal is generally unobstructed. Thus, GPS and laser data can be combined into integrated solution architecture. The system architecture developed also exploits INS navigation states for improved solution robustness: e.g., for robust feature association between scan images and for coasting through instances where sufficient number of combined GPS/laser measurements is unavailable. A tightly coupled GPS/laser scanner/INS mechanization is developed and applied for centimeteraccurate trajectory reconstruction.The paper uses live urban data to demonstrate that combined GPS and laser scanner data generally support the observability of navigation states at any part of the urban trajectory; and, for those limited cases where insufficient GPS/laser measurements are available, the INS coasting option can be efficiently utilized. Test results presented also show that the developed tightly coupled GPS/laser scanner/INS solution provides accurate trajectory reconstruction capabilities (one sigma error residuals are at a cm-level) in challenging urban environments.

Consistent map building in petrochemical complexes for firefighter robots using SLAM based on GPS and LIDAR

“…Wei et al used a normalized innovation squared (NIS) method to evaluate each camera/laser/GPS sensor validity before fusing the sensors with an unscented information filter for localization [17]. Soloviev used a Kalman filter with GPS, inertial measurements, and LIDAR [18]. Hentsche et al used a Kalman filter to integrate GPS and the inertia measurement.…”

Context-Aided Sensor Fusion for Enhanced Urban Navigation

“…The state vector is simplified to position, velocity and orientation (5D), assuming that optic gyro biases are negligible. With an analogous strategy to facilitate inertial calibration, in [30], GPS, INS and laser scanners are fused in urban environments, proposing the exploitation of complementary nature of GPS and laser scanner sensors in urban conditions (when GPS is occluded by buildings is when laser images become available). A Kalman filter estimates inertial error states using as observables the measurement domain of GPS and laser scanner (range-domain data fusion).…”

GPS and Electronic Fence Data Fusion for Positioning within Railway Worksite Scenarios

“…Despite the improvement on accuracy obtained by a INSaided system, it does not comply with the reliability requirements for safety-critical applications. Alternative techniques such as dead reckoning [14], video-aided systems [15], laser scanner aided [16] or RFID technology [17] are also not suitable for the application considered in this paper.…”