Threshold value of DC array current and DC string voltage for fault detection in grid-connected photovoltaic system

Abstract

The failure detection in a grid-connected photovoltaic (PV) system has become an important aspect of solving the issue of the reduced energy output in the PV system. One of the methods in detecting failure is by using the threshold-based method to compute the ratio of actual and predicted DC array current and DC string voltage value. This value will be applied in the failure detection algorithm by using power loss analysis and may reduce the time, cost and labour needed to measure the quality of the energy output of the PV system. This study presented the threshold value of DC array current and DC string voltage to be implemented in the algorithm of fault detection in grid-connected photovoltaic (PV) system under the Malaysian climate. Data from the PV system located at Green Energy Research Center (GERC) was recorded in 12 months interval using the monocrystalline PV modules. The actual data was recorded using five minutes interval for 30 consecutive days. The prediction of the data was calculated using the mathematical method. The threshold value was determined from the ratio between actual and predicted data. The results show that the DC array current threshold value, σ is 0.9816. While, DC string voltage threshold value, λ is 0.9261. The proposed value may be beneficial for the determination of threshold value for regions with the tropical climate.

Fault Diagnostic Methodologies for Utility-Scale Photovoltaic Power Plants: A State of the Art Review

“…The pre-setting current and voltage, given the number of connected panels in series and parallel PV configurations, implement an automated fault-diagnostics technique. This technique offers reasonable simplification and effectiveness in diagnosing the faults for grid-connected PV systems [67]. Electrical signatures such as current and voltage are employed as fault indicators for partial shading and inverter disconnection.…”

Performance monitoring as fault detection approach on AC power output of monocrystalline grid-connected photovoltaics system

“…Another study by Muhammad et al [15], perform the ratio of voltage and current for fault detection algorithm. This technique calculates the discrepancy in measured and modelled PV system outputs is used to detect faults.…”

Dual-axis Solar Energy Tracking and Monitoring System with Arduino as a Microcontroller

“…There are several factors that contribute to the performance of a solar photovoltaic (PV) such as level of solar irradiance, photovoltaic material, panel orientation, temperature as well as soiling. In addition, shading factor is also affecting the solar production [3,4]. Therefore, in order to maximize the solar energy production, a tracking mechanism known as maximum power point tracking (MPPT) is vital in orienting the solar panel accurately towards the solar radiation as the direction continuously varies over a day.…”