Thermophoretic Coating with Molybdenum Oxide Nanoparticles

Abstract

Thermophoretic and electrophoretic coatings are the main viable mechanisms for the coating of objects with nanoparticles. Unlike electrophoretic coating, thermophoretic coating has the advantage that electrically conductive substrates are not a requirement. This paper investigates the thermophoretic deposition and uniformity of molybdenum oxide nanoparticles, generated by a glowing wire generator, on various surfaces at three different flow rates (0.3, 1 and 1.5 L min–1). The quantitative evidence of the presence of particles collected by a suggested thermophoretic precipitator at different flow rates has shown that a uniform distribution of the particles could be achieved across the whole area of the precipitator. SEM and TEM micrographs of the film confirmed that a homogeneous densely packed network of molybdenum oxide nanoparticles was built across the precipitation area at the flow rate of 1.5 L min–1.