Thermometric and calorimetric methods in electrochemical and corrosion studies

Moxifloxacin Antibiotic as Green Corrosion Inhibitor for Carbon Steel in 1 M HCl

“…From the results, one can see when the concentration of Moxifloxacin was increased, the corrosion current density gradually decreased and the inhibition efficiency increased. The nearly steady values of (E corr ) and the decreases of corresponding partial anodic and cathodic current densities, these data show that Moxifloxacin acts as mixed-type inhibitor [43]. Addition of Moxifloxacin has no significant effect on the values of anodic and cathodic Tafel slopes (b a , b c ).…”

Analytical and electroanalytical techniques in the determination of (Fe+2) results from iron corrosion: effect of omeprazole drugs as green inhibitors

“…The analytical and electroanalytical techniques are widely used in the determination of ferrous ion and the rate of corrosion of iron in different corrosive medium and at different pH (1)(2)(3)(4)(5)(6)(7)(8)(9). Ferrous ions in aqueous medium result from the iron corrosion, when the iron metal is subjected to corrosive environment, it is directly changed into ferrous ion in the solution and consequently the metal is damaged; the rate of corrosion and metal damaged is determined gravimetrically by the ferrous ion concentration passing into the solution, as the rate of corrosion increases, the concentrations of ferrous ions in the corrosive medium increase and vice versa.…”

Microcalorimetry of Electrochemical Reactions at Submonolayer Conversions

“…In contrary, only few calorimetric results exist, which explicitly consider chemical reactions preceding or following the electrochemical reaction steps. Among these are calorimetric studies of water formation from the elements [8], hydrogen and oxygen evolution [9,10], formaldehyde oxidation [11], charging and discharging of batteries [12,13] and corrosion [14].…”